Bedienungsanleitung Roland CUBE-30 (Seite 4 von 8) (Englisch)

527779

Zoom out

Zoom in

Vorherige Seite

1/8

Nächste Seite

101a

• The unit should be located so that its location or

position does not interfere with its proper venti-

lation.

..........................................................................................................

102a

• Always grasp only the plug on the power-supply

cord when plugging into, or unplugging from an

outlet.

..........................................................................................................

104

• Try to prevent cords and cables from becoming

entangled. Also, all cords and cables should be

placed so they are out of the reach of children.

..........................................................................................................

106

• Never climb on top of, nor place heavy objects on

the unit.

..........................................................................................................

107a

• Never handle the power cord or its plug with wet

hands when plugging into, or unplugging from,

an outlet.

..........................................................................................................

108a

• Before moving the unit, disconnect the power

plug from the outlet, and pull out all cords from

external devices.

..........................................................................................................

109a

• Before cleaning the unit, turn off the power and

unplug the power cord from the outlet.

..........................................................................................................

110a

• Whenever you suspect the possibility of lightning

in your area, pull the plug on the power cord out

of the outlet.

..........................................................................................................

IMPORTANT NOTES

291b

In addition to the items listed under “IMPORTANT SAFETY INSTRUCTIONS” and “USING THE UNIT SAFELY” on

pages 2 and 3–4, please read and observe the following:

Power Supply

301

• Do not use this unit on the same power circuit with any device

that will generate line noise (such as an electric motor or variable

lighting system).

307

• Before connecting this unit to other devices, turn off the power to

all units. This will help prevent malfunctions and/or damage to

speakers or other devices.

Placement

351

• Using the unit near power amplifiers (or other equipment

containing large power transformers) may induce hum. To

alleviate the problem, change the orientation of this unit; or move

it farther away from the source of interference.

352a

• This device may interfere with radio and television reception. Do

not use this device in the vicinity of such receivers.

352b

• Noise may be produced if wireless communications devices, such

as cell phones, are operated in the vicinity of this unit. Such noise

could occur when receiving or initiating a call, or while

conversing. Should you experience such problems, you should

relocate such wireless devices so they are at a greater distance

from this unit, or switch them off.

354b

• Do not expose the unit to direct sunlight, place it near devices

that radiate heat, leave it inside an enclosed vehicle, or otherwise

subject it to temperature extremes. Also, do not allow lighting

devices that normally are used while their light source is very

close to the unit (such as a piano light), or powerful spotlights to

shine upon the same area of the unit for extended periods of time.

Excessive heat can deform or discolor the unit.

355

• To avoid possible breakdown, do not use the unit in a wet area,

such as an area exposed to rain or other moisture.

356

• Do not allow rubber, vinyl, or similar materials to remain on the

unit for long periods of time. Such objects can discolor or

otherwise harmfully affect the finish.

357

• Do not put anything that contains water (e.g., flower vases) on

the unit. Also, avoid the use of insecticides, perfumes, alcohol,

nail polish, spray cans, etc., near the unit. Swiftly wipe away any

liquid that spills on the unit using a dry, soft cloth.

359

• Do not paste stickers, decals, or the like to this instrument.

Peeling such matter off the instrument may damage the exterior

finish.

Maintenance

401b

• To clean the unit, use a dry, soft cloth; or one that is slightly

dampened. Try to wipe the entire surface using an equal amount

of strength, moving the cloth along with the grain of the wood.

Rubbing too hard in the same area can damage the finish.

402

• Never use benzine, thinners, alcohol or solvents of any kind, to

avoid the possibility of discoloration and/or deformation.

Additional Precautions

553

• Use a reasonable amount of care when using the unit’s buttons,

sliders, or other controls; and when using its jacks and

connectors. Rough handling can lead to malfunctions.

556

• When connecting / disconnecting all cables, grasp the connector

itself—never pull on the cable. This way you will avoid causing

shorts, or damage to the cable’s internal elements.

557

• A small amount of heat will radiate from the unit during normal

operation.

558a

• To avoid disturbing your neighbors, try to keep the unit’s volume

at reasonable levels. You may prefer to use headphones, so you

do not need to be concerned about those around you (especially

when it is late at night).

559a

• When you need to transport the unit, package it in the box

(including padding) that it came in, if possible. Otherwise, you

will need to use equivalent packaging materials.

562

•

Use a cable from Roland to make the connection. If using some other

make of connection cable, please note the following precautions.

• Some connection cables contain resistors. Do not use cables

that incorporate resistors for connecting to this unit. The use

of such cables can cause the sound level to be extremely low,

or impossible to hear. For information on cable specifications,

contact the manufacturer of the cable.

921

• To prevent malfunction and/or damage to speakers or other

devices, always turn down the volume, and turn off the power on

all devices before making any connections.

941

• Once the connections have been completed, turn on power to

your various devices in the order specified. By turning on devices

in the wrong order, you risk causing malfunction and/or damage

to speakers and other devices.

When powering up: Turn on the power to the CUBE-30 last.

When powering down: Turn off the power to the CUBE-30 first.

• Wrap the AC cord around the cord hook when trans-porting or

storing the unit.

Roland CUBE-30 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Roland CUBE-30

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info