NederlandsEnglish
USING
3
CAUTION
Place in a well v
The unit should be located so that its
location or position does not interfere
with its proper ventilation.
When disconnecting the power cord, grasp it b
the plug
T
grasp the power cor
disconnecting it from this unit or from a
power outlet.
Periodically clean the power cor
At regular intervals, you should unplug
the power plug and clean it by using
a dry cloth to wipe all dust and other
accumulations away fr
Also, disconnect the pow
power outlet whenever the unit is to r
for an extended period of time. Any ac
dust between the power plug and the power outlet
can result in poor insulation and lead to re
CAUTION
Manage cables for safety
T
becoming entangled. Also
cables should be placed so they are out
of the reach of children.
Av
objects on it
Never climb on top of
objects on the unit.
Do not connect or disconnec
wet hands
Never handle the power cor
with wet hands when plugging into
unplugging from, an outlet or this unit.
Disconnect everything before moving the unit
Before moving the unit, disconnect the
power plug from the outlet, and pull out
all cords from external devices.
CAUTION
Unplug the power cord fr
cleaning
Before cleaning the unit, turn it o and
unplug the power cord fr
(p. 7).
If there is a possibility of lightning strike,
disconnect the power cord from the outlet
Whenever you suspect the possibility of
lightning in your area, pull the plug on
the power cord out of the outlet
T
The cooling vents on the r
unit may become hot, so take care to
avoid burns.
Do not remove the speak
Do not remove the speaker grille and
speaker by any means. Speaker is
replaceable. Shock hazar
and currents are present inside the
enclosure.
IMPORT
Po
• Do not connec
being used by an electrical appliance that is controlled
by an inverter or a motor (such as a refrigerat
washing machine, microwa
Depending on the way in which the electrical appliance
is used, power supply noise may cause this unit t
malfunction or may produce audible noise. If it is not
practical to use a separate electrical outlet, connect
a power supply noise lter between this unit and the
electrical outlet.
• To pr
make sure to turn o the power on all y
before you make an
Placement
• Using the unit near power ampliers (or other
equipment containing large pow
induce hum.
orientation of this unit; or move it farther away from the
source of interference.
• This device may interfere with radio and television
reception. Do not use this device in the vicinity of such
receivers.
• Noise may be produced if wireless communications
devices, such as cell phones, ar
of this unit. Such noise could occur when receiving
or initiating a call, or while conv
experience such problems, you should r
wireless devices so they are at a gr
this unit, or switch them o
• Do not expose the unit to direct sunlight, place it near
devices that radiate heat, lea
vehicle, or otherwise subject it to temperature extremes.
Also, do not allow lighting devic
while their light source is very close to the unit (such
as a piano light), or powerful spotlights to shine upon
the same area of the unit for extended periods of time.
Excessive heat can def
• When moved from one location to another where the
temperature and/or humidity is very dierent, wa
droplets (condensation) may f
Damage or malfunction may result if you attempt to use
the unit in this condition.
unit, you must allow it to stand f
the condensation has completely evaporat
• Do not allow rubber, vinyl
on this unit for long periods of time. Such objects can
discolor or otherwise harmfully aect the nish.
• D
instrument. Peeling such matt
damage the exterior nish.
• D
surface on which you place the unit, its rubber feet may
discolor or mar the surface.
Y
feet to prev
make sure that the unit will not slip or move acciden
• D
liquid on top of this unit. Also, whenev
has been spilled on the surface of this unit, be sure to
promptly wipe it away using a soft, dry cloth.
Maintenance
• For everyday cleaning wipe the unit with a soft, dry cloth
or one that has been slightly dampened with water
remove stubborn dirt, use a cloth impregnated with a
mild, non-abrasive deter
wipe the unit thoroughly with a soft, dry cloth.
• Never use benzine, thinners, alcohol or solvents of any
kind, to avoid the possibility of discoloration and/or
deformation.
Additional Precautions
• Use a reasonable amount of care when using the unit’
buttons, sliders, or other contr
its jacks and connectors. Rough handling can lead to
malfunctions.
• When disconnecting all cables, grasp the connector
itself—never pull on the cable.
causing shorts, or damage to the cable’
elements.
• A small amount of heat will radiate from the unit during
normal operation.
• To a
volume at reasonable levels
• When you need to transport the unit, pack
box (including padding) that it came in, if possible.
Other
materials.
• S
cables that incorporate resistors f
unit.
be extremely low
on cable specications, contact the manufacturer of the
cable.
Intellectual Propert
• I
recording
work (musical work, video work, broadcast, live
performance, or other work), whether in whole or in part,
and distribute, sell, lease, perform, or broadcast it without
the permission of the copyright owner
• Do not use this produc
infringe on a copyright held by a third party.
assume no responsibility whatsoever with regard t
infringements of third-party copyrights arising through
your use of this product.
• MMP (M
portfolio concerned with microprocessor archit
which was developed by
(
Group.
• Roland, COSM and CUBE are either registered tr
or trademarks of Roland Corporation in the United States
and/or other countries.
• Company names and product names appearing in this
document are register
respective owners.
• The product names mentioned in this document are
registered trademarks or trademarks of their r
owners. In this manual, these names are used because it is
the most practical way of describing the sounds that are
simulated using COSM technology
• iPad, iPhone are either regist
trademarks of Apple Inc.
