Bedienungsanleitung Roland CY-12R-C (Seite 5 von 8) (Englisch)

710316

Zoom out

Zoom in

Vorherige Seite

1/8

Nächste Seite

Attaching to a Stand

Attach the CY-12R/C with the optional cymbal mount (MDY

series), or drum stand cymbal mount (MDS series).

1. Use a commercially available drum key to

tighten the stopper bolt.

The stopper keeps the CY-12R/C from turning, and

prevents the cables from catching or getting tangled on the

stand.

fig.01.e

2. Attach the CY-12R/C so the unit is oriented as

shown in the diagram (bolt should be opposite

the output jacks).

3. Tighten the wing nut to obtain the desired

movement.

Use the included felt washer and the wing nut.

fig.02.e

• Double sounding may occur if the wing nut is loose.

• Do not use the washer or felt included with the cymbal

mount (MDY series).

Connecting to

a Percussion Sound Module

(TD-6, TD-8, TD-10, etc.)

About the Output Jacks

The CY-12R/C features two different output jacks, BOW/BELL

and BOW/EDGE.

Use the BOW/BELL output jack when you want to play the

bow and the bell sounds; use the BOW/EDGE output jack

when you want to play the bow and the edge sounds.

Use either the BOW/BELL or BOW/EGDE output jack, but

not both at the same time (except for the TD-10 + TDW-1 with

V-Cymbal Control).

Connecting both jacks results in two separate trigger inputs

playing simultaneously.

If you are using the TD-10 + TDW-1 with V-Cymbal Control,

you can use both the BOW/BELL and BOW/EGDE output

jacks at the same time (Three Way Triggering). For more

details, refer to “If Using TD-10 + TDW-1 with V-Cymbal

Control” (p. 6).

Making the Connections

To prevent malfunction and/or damage to speakers or other

devices, always turn down the volume, and turn off the power

on all devices before making any connections.

Use the included cable to connect one of the CY-

12R/C’s output jacks (either one, but not both,

EXCEPT when using with the TD-10 + TDW-1

with V-Cymbal Control installed) to the drum

sound module’s trigger input jack.

Connect the L-shaped plug of the included cable to the

CY-12R/C. This will prevent strain from being applied to

the CY-12R/C.

To make use of edge shot and choking play techniques,

you'll need to connect to a trigger input jack on the

percussion sound module that accommodates rim shots.

The TD-8's “1/2 (KICK 1/2)” and “11/12 (AUX 1/2)” do

not support rim shots.

2. Secure the cable with cable ties.

Leave enough slack so that the cable is not pulled by any

shaking or vibration of the cymbal when it is struck.

fig.CY03.e

Take care to ensure that the cable does not come into

contact with the cymbal or stand. Contact between the

cable and the cymbal or stand can result in problems,

Stopper

(Be sure to

orient it correctly)

Tighten the bolt with

a commercially available

drum key

Wing Nut

Felt Washer

Output Jack Corresponding Play

Methods

Tones

Sounded

BOW/BELL Bow Shot (p. 6) Head

Bell Shot (p. 6) Rim

Choke (p. 7) –

BOW/EDGE Bow Shot (p. 6) Head

Edge Shot (p. 6) Rim

Choke (p. 7) –

Tighten it

not to slip

Wind the cable

tie twice

Secure the cable in place

with the cable tie

Leave some

slack in

the cable

Turn back

to fix the

cable

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Roland CY-12R-C Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Roland CY-12R-C

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info