Bedienungsanleitung Roland D-2 GROOVEBOX (Seite 98 von 115) (Deutsch)

527871

Zoom out

Zoom in

Vorherige Seite

1/115

Nächste Seite

MIDI-Implementation

Model: D2 Groovebox

Date: Mar. 12, 2001

Version: 1.00

Symbol Description Range

n MIDI Channel 0H–6H,9H (ch.1–ch.7,ch.10)

vv Control value 00H–7FH (0–127)

kk Note Number 00H–7FH (0–127)

xx ON/OFF 00H–3FH (0–63:OFF), 40H–7FH (64–127:ON)

1. Data reception (sound source section)

■Channel voice messages

●Note Off

status 2nd byte 3rd byte

8nH kkH vvH

9nH kkH 00H

vv=Note Off velocity: 00H - 7FH (0 - 127)

●Note On

status 2nd byte 3rd byte

9nH kkH vvH

vv=Note On velocity: 01H - 7FH (1 - 127)

●Polyphonic Aftertouch

status 2nd byte 3rd byte

AnH kkH vvH

vv=Polyphonic Aftertouch: 00 00H - 7FH (0 - 127)

●Control Change

* Not received when the Rx Switch parameter is OFF.

❍Bank Select (Controller number 0,32)

status 2nd byte 3rd byte

BnH 00H mmH

BnH 20H llH

mm,ll=Bank number: 00 00H–7F 7FH (bank.1–bank.16384)

* Not received when the Rx Program Change Switch or Rx Bank Select Switch parameter

is OFF.

* The Patches corresponding to each Bank Select are as follows.

Bank Select | Program No | Group Patch No.

MSB | LSB | |

——————+—————+————————————+————————————————————————————————————————

81 | 0 | 001 - 128 | Preset A 001 - 128

81 | 1 | 001 - 128 | Preset B 001 - 128

81 | 2 | 001 - 128 | Preset C 001 - 128

81 | 3 | 001 - 128 | Preset D 001 - 128

84 | 0 | 001 - 088 | Preset E 001 - 088

85 | 0 | 001 - 128 | User 001 - 128

85 | 1 | 001 - 128 | User 129 - 256

* The Rhythm set corresponding to each Bank Select are as follows.

Bank Select | Program No | Group Patch No.

MSB | LSB | |

——————+—————+————————————+————————————————————————————————————————

81 | 0 | 1 - 26 | Preset A 01 - 26

84 | 0 | 1 - 4 | Preset B 01 - 04

85 | 0 | 1 - 20 | User 01 - 20

❍Modulation (Controller number 1)

status 2nd byte 3rd byte

BnH 01H vvH

* The effect will apply according to the Modulation Control setting.

❍Data Entry (Controller number 6,38)

status 2nd byte 3rd byte

BnH 06H mmH

BnH 26H llH

mm,ll= the value of the parameter specified by RPNmm=MSB, ll=LSB

❍Expression (Controller number 11)

status 2nd byte 3rd byte

BnH 0BH vvH

* Expression messages are used to adjust the volume of each part.

❍Hold 1 (Controller number 64)

status 2nd byte 3rd byte

BnH 40H xxH

❍Sostenuto (Controller number 66)

status 2nd byte 3rd byte

BnH 42H xxH

❍Soft (Controller number 67)

status 2nd byte 3rd byte

BnH 43H xxH

❍Hold 2 (Controller number 69)

status 2nd byte 3rd byte

BnH 45H xxH

❍Portamento Control (Controller number 84)

status 2nd byte 3rd byte

BnH 54H kkH

* A Note On message received immediately after a Portamento control will be sounded

with the pitch changing smoothly from the source note number. If a voice is already

sounding at the same note number as the source note number, that voice will change

pitch to the pitch of the newly received Note On, and continue sounding (i.e., will be

played legato).

* The speed of the pitch change caused by Portamento is determined by the Portamento

Time parameter.

❍RPN MSB/LSB (Controller number 100,101)

status 2nd byte 3rd byte

BnH 65H mmH

BnH 64H llH

mm=MSB of the parameter number specified by RPN

ll=LSB of the parameter number specified by RPN

<< RPN >>

Control Changes include RPN (Registered Parameter Numbers), which are extended

parameters whose function is defined in the MIDI specification.

When using RPNs, first the RPN (Controller numbers 100 and 101; they can be sent in any

order) is transmitted to specify the parameter you wish to control. Then, Data Entry

messages (Controller numbers 6 and 38) are used to set the value of the specified parameter.

Once a RPN parameter has been specified, all further Data Entry messages on that channel

are considered to apply to that specified parameter. In order to prevent accidents, when the

desired setting has been made for the parameter, it is recommended that RPN be set to Null.

This device receives the following RPNs.

RPN Data entry

MSB LSB MSB LSB Notes

00H 00H mmH — Pitch Bend Sensitivity

mm : 00H–0CH (0–12 semitones)

ll : ignored (processed as 00H)

Up to 1 octave can be specified in semitone steps.

*The Bend Range up parameter, Bend Range Down parameter will

also be changed.

*Not received by the Part R.

00H 01H mmH llH Master Fine Tuning

mm, ll: 20 00H–40 00H–60 00H ( -4096 x 100 / 8192–0–+4096 x 100 /

8192 cent )

*The Fine Tune parameter of each Part will change.

00H 02H mmH — Master Coarse Tuning

mm : 10H–40H–70H (-48–0–+48 semitones)

ll : ignored (processed as 00H)

*The Key Shift parameter of each Part will change.

7FH 7FH — — RPN null

RPN will be set as “unspecified”. Once this setting has been made,

subsequent Data Entry messages will be ignored. (It is not necessary to

transmit Data Entry for RPN Null settings.) Parameter values that

were previously set will not change.

mm, ll: ignored

For the functions of other controller numbers, refer to

“Table of Transmitted Data” (p. 76).

Roland D-2 GROOVEBOX Seite 98

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Roland D-2 GROOVEBOX

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info