Bedienungsanleitung Roland D-2 GROOVEBOX (Seite 33 von 116) (Englisch)

527871

Zoom out

Zoom in

Vorherige Seite

1/116

Nächste Seite

Chapter 3. About the D-FIELD

Chapter 3

XY mode

Changing the brightness of the sound/Adding character to the sound (FILTER)

You can vary the brightness of the current part by the location of your touch. Left/right movement will vary the cutoff

frequency. Upward movement will apply more emphasis to the region surrounding the cutoff frequency (resonance),

producing a distinctive tone.

➔ Changing the D-FIELD settings (p. 22)

Applying special effects to the sound (MFX)

You can simultaneously control any two desired parameters of a multi-effects (p. 44).

* There will be no effect if [MFX] is dark. Press [MFX] to make it light.

➔ Changing the D-FIELD settings (p. 22)

While setting X or Y, you can hold down the D-FIELD function button [MFX] and press one of the part buttons to turn the Part

MFX Switch (p. 19) on/off. The part button will light to indicate parts for which the multi-effects is on.

Making detailed settings

1. Hold down the D-FIELD function button [MFX], and press [EDIT].

2. Press [ENTER] to select the desired parameter.

3. Turn [VALUE] to change the setting.

For details on the parameters and their settings, refer to the explanation for each effect (pp. 45–57).

Display Explanation Setting

TYPE Select the type of fil-

ter.

* At the factory

settings, the filter

will be as specified

by the patch

selected for the

current part of the

current pattern.

OFF:

The filter will not be applied.

LPF (Low Pass Filter):

Moving your finger toward the right will cause the sound to become increasing-

ly closer to the original waveform, and be brighter. Moving your finger toward

the left will increasingly cut the higher frequencies, making the sound darker.

* For some waveforms, you may hear no sound at all if you move your finger far

toward the left.

BPF (Band Pass Filter):

Moving your finger toward the right will increasingly cause only the high fre-

quency range to be heard. Moving your finger toward the left will increasingly

cause only the low frequencies to be heard.

HPF (High Pass Filter):

Moving your finger toward the right will increasingly cut the lower frequencies,

sharpening the sound. Moving your finger toward the left will cause the sound

to become increasingly closer to the original waveform.

* For some waveforms, you may hear no sound at all if you move your finger far

toward the right.

PKG (Peaking Filter):

Moving your finger toward the right will increasingly emphasize the high fre-

quency range. Moving your finger toward the left will increasingly emphasize

the lower frequency range.

X none Cutoff Frequency Cutoff Frequency (fixed)

Y none Resonance Resonance (fixed)

Display Explanation Setting

TYPE Select the multi-effects type. Refer to “Available Settings” (p. 44).

X Select the parameter that will be affected

when you move your finger to left or

right.

Refer to the explanation for each effect (pp. 45–57).

* When you change the type, the parameter whose value is

followed by an “X” or “Y” will be selected automatically (X =

left/right, Y = up/down).

* It is not possible to select the same parameter for both X and Y.

Y Select the parameter that will be affected

when you move your finger upward or

downward.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Roland D-2 GROOVEBOX Seite 33

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Roland D-2 GROOVEBOX

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info