Bedienungsanleitung Roland D-2 GROOVEBOX (Seite 80 von 116) (Englisch)

527871

Zoom out

Zoom in

Vorherige Seite

1/116

Nächste Seite

Chapter 8. System Settings and MIDI Applications

Synchronization with an External

MIDI Device

Timing of the D2’s sequencer can be synchronized with that

of another sequencer for playback. This feature enables large-

scale performance playing back a number of parts at the

same time.

Making an external MIDI sequencer

synchronized with playback on the D2

Now, let’s make D2’s patterns synchronized with an external

MIDI sequencer. (In this example, the external MIDI sound

generator is played back using the MIDI data from the

external MIDI sequencer.)

Set up the D2

1. Set SYNC OUT to “ON” (p. 74).

This setting enables synchronizing signals to be

transmitted from the D2’s MIDI OUT.

2. Set the sequence output assignment for all parts of

the pattern to be used to “INT” (p. 19).

This setting enables the D2 to output only MIDI clocks

and start/stop information from the MIDI OUT

connector.

Set up the external sequencer

3. Set the external MIDI sequencer so it will

synchronize to the MIDI Clock messages that it

receives.

For details on the setting, refer to the owner’s manual for

your MIDI sequencer.

Start synchronized playback.

4. Press the [ ] button of the D2, and synchronized

playback will begin.

5. To stop synchronized playback, press [ ] button

on the D2.

The external MIDI sequencer will also stop.

Making the D2 synchronized with

performance on an external

sequencer.

The playback of the D2’s sequencer can be synchronized to

the MIDI Clock messages transmitted from an external MIDI

sequencer or from a hard disk recorder (optional). In the

following example, we will synchronize the D2 pattern

playback to an external source of timing.

Set up the D2.

1. Set SYNC MODE to “SLAVE” (p. 74).

2. Press the [ ] button on the D2.

Returns to the beginning of pattern.

Set up the external sequencer.

3. Set up so that MIDI clocks are transmitted from the

external MIDI sequencer.

For details on the setting, refer to the owner’s manual for

your external MIDI sequencer.

Start synchronized playback.

4. Press the [PLAY] button of the external MIDI

sequencer, and synchronized playback will begin.

5. To stop synchronized playback, press [STOP] button

on the external sequencer.

* As required, set up to block transmission of playback

information from the external device to the D2. (Or, set MIDI

channels 1 to 7 and 10, corresponding to those used on the D2,

not to be used for data transmission.) Otherwise, the D2

performs playback with playback information from the external

device. For details, see the operation manual of the external

MIDI device.

* It is also possible to control playback/stop operations only

without synchronization with MIDI clocks transmitted from

the external MIDI sequencer. In this case, set Sync mode of the

D2 to “REMOTE.”

Sequencer

MIDI IN MIDI OUT

MIDI INMIDI OUT

Sequencer

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Roland D-2 GROOVEBOX Seite 80

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Roland D-2 GROOVEBOX

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info