Bedienungsanleitung Roland DJ-202 (Seite 12 von 17) (Englisch)

710369

Zoom out

Zoom in

Vorherige Seite

1/17

Nächste Seite

Operating the DJ-202

Changing instruments

You can switch the instrument sounds in units of kits.

You can use twelve kits.

1. Hold down the [SHIFT] button and press a performance pad to

select a kit.

You can use the PARAM [−] [+] buttons to switch the kit 1–8 and kit 9–12.

5 PARAM [−] button is lit

Kit 1 Kit 2 Kit 3 Kit 4

Kit 5 Kit 6 Kit 7 Kit 8

5 PARAM [+] button is lit

Kit 9 Kit 10 Kit 11 Kit 12

Sampler Operations (SAMPLER)

In sampler mode, you can assign samplers to performance pads 1–4 and

manual loops to performance pads 5–8.

1 2 3 4

5 6 7 8

Sampler

Manual loop

Assigning samplers

You can use the performance pads to play songs (samples) that are loaded

into Serato Sampler’s sample slots.

1. In Serato DJ Intro, click the [Samples] key to access the Samples

panel.

2. Press the [SAMPLER] button to make it light

3. Drag and drop songs into the Sampler panel to load a sample

into each slot of the Sampler panel.

The sampler settings and the loaded samples are saved.

4. Press a performance pad.

The sample of the slot that’s assigned to the pad you pressed is played.

Slot 1 Slot 2 Slot 3 Slot 4

5. To stop sample playback, press the same performance pad

once again.

Assigning manual loops

The operation is the same as for manual loop of hot cue mode (p. 11).

Eect Operations

Serato DJ Intro has two eect units (FX 1, FX 2); you can use FX 1 for deck 1,

and use FX 2 for deck 2.

Click Serato DJ Intro’s [DJ-FX] key to open the DJ-FX panel.

1 1

Currently selected eect type

Time at which the eect is applied

Eect on/o status (highlighted when on)

Eect depth

1. To select the eect type, hold down the [SHIFT] button and

press an eect button [1]–[3] of the deck that you want to

operate.

The eect type changes each time you press the button.

FX 1 FX 2

2. Press the eect button [1]–[3] to turn the eect on (button lit).

3. Use the [LEVEL] knob to adjust the depth of the eect.

The [LEVEL] knob simultaneously controls the depth of the three eects.

4. Hold down the [SHIFT] button and turn the [LEVEL] knob to

adjust the time for which the eect is applied.

MEMO

By tapping the [TAP] button at the desired interval, you can set the

value that is the basis for the time at which the eect is applied.

Changing the Eect Tempo

Serato DJ Intro lets you set the tempo of the eect in either of two ways.

Auto tempo mode (default setting)

The eect tempo is determined based on the BPM value of the song.

Manual tempo mode

The basic tempo (BPM value) for the eect is set by the interval at which

you tap the [TAP] button.

Switching the tempo mode

5 In auto tempo mode, tap the [TAP] button three or more times to

switch to manual tempo mode. (button lit)

5 In manual tempo mode, long-press the [TAP] button to reset the

specied tempo and switch to auto tempo mode. (button unlit)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Roland DJ-202 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Roland DJ-202

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info