Bedienungsanleitung Roland DJ-505 (Seite 8 von 32) (Englisch)

710374

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

Panel Descriptions

TR-S Section

This is a 16-step sequencer. You can create rhythm tracks using sounds of the Roland TR-808 rhythm machine etc. or samples in Serato DJ.

[VALUE] knob

Changes the value of settings such as tempo,

pattern scale, or shue.

[SHIFT] button

You can recall other functions by holding down

this button and pressing another button.

Display

This shows various information depending on

the operation.

[SYNC] button

Synchronizes the tempo of the rhythm to the

tempo of Serato DJ.

[SHIFT] + [SYNC] Disables tempo synchronization.

[SCALE] button

Selects one of the following choices as the time

value of one step.

8th note triplet (

)

Three steps will be one beat.

16th note triplet (

)

Six steps will be one beat.

16th note (

)

Four steps will be one beat.

32nd note (

)

Eight steps will be one beat.

[SHIFT] + [SCALE] Species the last step.

[SHUFFLE] button

Adjusts shue (rhythmic swing).

[SHIFT] + [SHUFFLE] Sets the nudge setting.

[MUTE] button

Mutes the selected instrument.

[TR-REC] button

Lets you step-record a pattern.

[SHIFT] + [TR-REC]

Lets you realtime-record a pattern

using the performance pads

(INST-REC).

[INST] button

Select the instruments when using TR-REC.

[SHIFT] + [INST]

Sets the kit for instruments, or

switches the sample bank in

Serato DJ.

[PATTERN] button

Lets you select rhythm patterns 1–16.

[SHIFT] + [PATTERN]

Adds an accent to the step when

using TR-REC.

[START/STOP] button

Plays/stops the pattern.

TR-S pads [1]–[16]

Use these buttons to turn steps on/o, to select

patterns/instruments, or to assign samples of Serato DJ

as instruments.

[CLEAR] button

Deletes the content recorded by TR-REC for a

specic instrument, or deletes the pattern.

[LEVEL] knob

Adjusts the volume of the selected instrument.

[TUNE] knob

Adjusts the tuning (pitch) of the selected

instrument.

[ATTACK] knob

Adjusts the strength of the attack for the

selected instrument.

* This has no eect for some instruments, or

when a sample is selected in Serato DJ.

[DECAY] knob

Adjusts the length of the decay for the selected

instrument.

* This has no eect when a sample is selected

in Serato DJ.

Front Panel

Headphones

[PHONES] jacks

Connect headphones here.

Stereo 1/4” (Ø 6.3 mm) and stereo 1/8” (Ø 3.5 mm) plugs are supported.

[VOLUME] knob

Adjusts the volume of the headphones.

[CROSS FADER] switch

Switches the response curve of the cross fader.

[REVERSE] switch

Reverses the left/right operation of the cross fader.

[CH 1], [CH 2] switches

Select the input source for each channel.

The sound loaded into the Serato DJ deck is the source.

Select this if you’re using DVS.

LINE The line level input is the source.

PHONO The phono level (MM type cartridge) input is the source.

[MIC LEVEL] knob

Adjusts the output volume of the mic.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Roland DJ-505 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Roland DJ-505

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info