Bedienungsanleitung Roland DJ-808 (Seite 26 von 32) (Englisch)

710397

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

Using Serato Flip

Flip Operations

Here we explain the procedure for using Serato Flip to create a song that

has a dierent structure than the original song.

Intro Verse 1 Verse 2 Ending

Verse 1 Verse 1 Verse 2 Ending

Original song

NOTE

You can use the PARAMETER [−] [+] buttons to operate Flip only in HOT

CUE mode.

Specifying Hot Cue

1. Load the song.

2. Press the [HOT CUE] button to make it light white.

Hot cue mode is selected.

3. Press a performance pad to make the hot cue settings shown in

the illustration below.

HOT CUE

Intro Verse 1 Verse 2 Ending

HOT CUE

Creating a Flip

1. Press the [PANEL] button to access the Flip panel.

2. In the virtual deck screen, click the Flip tab to see the Flip slots.

3. Press the PARAMETER [−] button to select the Flip record-ready

state.

4. Play back the song, and operate hot cue as shown in the

illustration below.

Verse 1 Verse 1 Verse 2 Ending

HOT CUE

5. Press the PARAMETER [−] button once again to stop Flip

recording.

When Flip recording stops, loop playback of the recorded Flip starts.

* The recorded Flip is held in temporary memory, and is not yet saved. If

you exit Serato DJ without saving it to a Flip slot, the Flip is lost.

Saving the Flip

1. In the virtual deck screen, click a Flip slot to select the save-

destination for the Flip.

2. In the Flip panel, click [Save].

Recalling and Playing a Flip

1. In the virtual desk screen, click a Flip slot to select a Flip slot.

2. Hold down the [SHIFT] button and press the PARAMETER [−]

button to turn Flip loop playback on/o.

If Flip slot loop in the virtual deck screen or Flip loop in the Flip panel is

highlighted, the Flip plays as a loop.

* If there is an unsaved Flip in temporary memory, the loop setting of

the Flip in temporary memory is turned on/o. If the Flip in temporary

memory is saved to a Flip slot, the loop setting of Flip in the selected

Flip slot is turned on/o.

3. Press the PARAMETER [+] button to play the Flip.

* If there is an unsaved Flip in temporary memory, the Flip that is in

temporary memory is recalled. If the Flip in temporary memory is saved

to a Flip slot, the Flip that is in the selected Flip slot is recalled. The

recalled Flip plays from the beginning of the Flip.

5 By holding down the [SHIFT] button and pressing the PARAMETER [+]

button, you can turn the Flip on without moving to the start of the Flip.

In this case, the Flip plays when the song playback location reaches the

beginning of the Flip.

Moving to the beginning of the Flip while a Flip is playing

1. While the Flip is playing, press the PARAMETER [+] button.

Each time you press the button, playback returns to the beginning of

the Flip and continues.

4. To end the Flip, hold down the [SHIFT] button and press the

PARAMETER [+] button.

Saved Flip Operations

By pressing a performance pad you can play back a saved Flip.

1. Press the [HOT CUE] button twice to make the button light

orange.

Saved Flip mode is selected.

2. Press a lit performance pad.

The Flip that is in the Flip slot corresponding to the pad you pressed starts

playing, and the pad illumination changes to blinking.

5 If you hold down the [SHIFT] button and press a blinking performance

pad (Flip currently playing), the Flip that is in the corresponding Flip

slot is recalled, but you won’t move to the beginning of the Flip. In

this case, the Flip plays when the song playback position reaches the

beginning of the Flip.

5 If you hold down the [SHIFT] button and press a lit performance pad,

the Flip that is in the corresponding Flip slot is recalled, but you won’t

move to the beginning of the Flip. In this case, the Flip plays when the

song playback position reaches the beginning of the ip.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Roland DJ-808 Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Roland DJ-808

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info