Bedienungsanleitung Roland DP-900 (Seite 34 von 48) (Englisch)

528003

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

Connecting External Devices

Connecting to Audio Equipment

You can connect audio devices to play the sound of the DP-

900 through the speakers of your audio system, or to record

your performance on a tape recorder or other recording

device.

When connecting, please use an audio cable with a standard

phone plug (sold separately).

Connection Examples

921

* To prevent malfunction and/or damage to speakers or other

devices, always turn down the volume, and turn off the power

on all devices before making any connections.

Playing the sound of the DP-900 through the

speakers of an audio system/Recording the

performance of the DP-900 on a recording device

fig.audio1.e

●

Use the following procedure when turning on the

power.

Turn on the power of the DP-900.

Turn on the power of the connected device.

Adjust the volume of each device.

When Recording DP-900 Performances on a Recording

Device

Start recording with the connected device.

Perform on the DP-900.

When the performance ends, stop recording on

the connected equipment.

Playing the sound of an audio device through the

speakers of the DP-900

fig.audio2.e

●

Use the following procedure when turning on the

power.

Turn on the power of the connected device.

Turn on the power of the DP-900.

Adjust the volume of each device.

Turning off the power

Set the volume of the DP-900 and of the

connected devices to the minimum position.

Turn off the power to the DP-900.

Turn off the connected equipment.

Connecting MIDI Devices

By connecting an external MIDI device and exchanging

performance data, you can control the performances on one

device from the other. For instance, you can output sound from

the other instrument or switch tones on the other instrument.

■

What’s MIDI?

MIDI stands for Musical Instrument Digital Interface, an

international standard which allows performance information

to be communicated among electronic musical instruments

and computers.

The DP-900 provides MIDI connectors, which allow

performance data to be exchanged with external devices. When

these connectors are used to connect the DP-900 to external

devices, an even wider range of possibilities becomes available.

984

*A separate publication titled “MIDI Implementation” is also

available. It provides complete details concerning the way

MIDI has been implemented on this unit. If you should require

this publication (such as when you intend to carry out byte-

level programming), please contact the nearest Roland Service

Center or authorized Roland distributor.

Input R/L

(Line In, Aux In)

DP-900

Output R/L

(Line Out, Aux Out)

DP-900

DP-900_e.book 34 ページ２００４年１１月２９日　月曜日　午後１２時５８分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Roland DP-900 Seite 34

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Roland DP-900

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info