Bedienungsanleitung Roland DP90 (Seite 10 von 64) (Englisch)

528008

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite



Panel Descriptions

Damper Pedal

Use this pedal to sustain the sound. While this pedal is held down, notes will be sustained for an extended time even if you

release your ngers from the keyboard.

On an acoustic piano, when you step on the damper pedal, you’ll rst hear the sound of the dampers releasing the strings. Then,

you should also be able to hear the sound of strings adjacent to the ones for the notes actually played resonate sympathetically,

resulting in a rich, resounding tone. Additionally, when using half-pedaling techniques, the core of the sound disappears rapidly

while a rich, spacious resonance remains, producing a unique form of reverberation. On the unit, the unique, lingering tones

produced by the half-pedaling technique are reproduced in addition to released-string sounds (Damper Noise) and resonating

sounds (Damper Resonance).

Sostenuto Pedal

The notes you are pressing when this pedal is depressed will be sustained.

Soft Pedal

This pedal is used to make the sound softer.

Playing with the soft pedal depressed produces a sound that is not as strong as when otherwise played with the equivalent

strength. This is the same function as the left pedal of an acoustic piano.

The softness of the tone can be varied subtly by the depth to which you press the pedal.

Pedals

Headphone Hook

Whenever you are not using the headphones, you can hang them

on the headphone hook.

* Don’t hang anything other than headphones on this hook, and don’t apply

excessive force to it.

Doing so may damage the headphone hook.

Front Panel

These buttons and sliders are used to operate the unit.

“Operation Guide” page 6–9

USB Memory Port

If a USB ash drive is

connected, you can

use it to save or play back songs.

You can do the following things using a USB ash

drive.

• WAVE les or MIDI les (SMF) data copied from your computer

can be played back by the unit.

• You can make audio recordings of your performances on the unit.

• The audio recordings of songs that you’ve made can be played on your

computer, or burned to a CD.

* Carefully insert the USB ash drives all the way in-until it is rmly in place.

* Use a USB ash drive sold by Roland. We cannot guarantee operation if any

other USB ash drive is used.

page 24 page 37

USB Port

If you use a commercially available USB

cable to connect the unit’s USB port to

your computer’s USB port, you’ll be able to

do the following things.

• SMF data played back by MIDI-compatible

software can be sounded by the unit.

• MIDI data can be transferred between the unit

and your sequencer software (sold separately),

opening up a wide range of possibilities for

music production and editing.

[Power] Switch

This turns the power on/o.

* With the factory settings, the unit’s power will automati-

cally be switched o 30 minutes after you stop playing or

operating the unit.

If the unit’s power has been turned o automatically, you can use

the [Power] switch to turn the unit back on again.

If you don’t want the power to turn o automatically, change the

“Auto O” setting to “OFF” as described on “Making the Power

Automatically Turn O After a Time (Auto O)” (p. 39).

page 13

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Roland DP90 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Roland DP90

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info