Bedienungsanleitung Roland DP90Se (Seite 39 von 68) (Englisch)

710534

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite



Convenient Functions

Making the Power Automatically

Turn O After a Time (Auto O)

With the factory settings, the unit’s power will automatically be

switched o 30 minutes after you stop playing or operating the

unit.

If you don’t need the power to turn o automatically, set “Auto O”

to the “OFF” setting as described below.

1. While holding down the [Key Touch] button, press the

[Transpose] button.

2. Use the [ ] [ ] (Slow/Fast) buttons to select “Auto

O .”

3. Use the [–] [+] buttons to change the setting.

Value Explanation

OFF The power will not turn o automatically.

The power will automatically turn o if no

operation is performed for 10 minutes.

30 (default)

The power will automatically turn o if no

operation is performed for 30 minutes.

240

The power will automatically turn o if no opera-

tion is performed for 240 minutes (4 hours).

* This setting is automatically stored in the unit.

4. Press the [Key Touch] button or the [Transpose] button to

nish the procedure.

NOTE

When turning the unit’s power back on after it has been shut

down due to the Auto O function, always make sure to allow

at least ve seconds to pass after the power has been shut o

before you turn the power back on. If you turn it back on too

rapidly, the Auto O function will not have had enough time to

reset itself, and you may not be able to turn on the power in the

normal way.

Retaining the Settings Even After

Power-o (Memory Backup)

The settings of the unit will return to their factory-set state when

you turn o the power. However, you can store the settings so that

they will be retained even after the power is turned o.

This is called the “memory backup” function.

Parameters Stored in Memory Backup Page

Ambience (on/o , depth) p. 18

Brilliance (on/o , depth) p. 18

Split Point p. 17

Twin Piano mode p. 20

Key Touch (on/o , value) p. 19

Damper Resonance p. 46

String Resonance p. 47

Key O Resonance p. 47

Dynamic Harmonic p. 47

Cabinet Resonance p. 47

Parameters Stored in Memory Backup Page

Soundboard Behavior p. 47

Note Volume p. 47

Note Character p. 47

Master Tuning p. 46

Temperament p. 46

Temperament Key p. 46

Stretch Tuning p. 47

Volume Limit p. 50

Dual Balance p. 46

Transpose Mode p. 47

Headphones 3D Ambience p. 46

Damper Pedal Part p. 48

MIDI Transmit Channel p. 48

Visual Control Channel p. 49

1. While holding down the [Key Touch] button, press the

[Transpose] button.

2. Use the [ ] [ ] (Slow/Fast) buttons to select “Backup.”

3. Press the [Song] button.

A screen will appear, allowing you to execute the backup.

4. Press the [ ] (Fast) button to select “Y.”

Memory backup will begin.

If you decide to cancel without executing, press the [

] (Slow)

button to select “N.”

When the memory backup has been completed, the screen of step

2 will appear.

NOTE

Never turn o the power while the screen indicates “Working...”

5. Press the [Key Touch] button or the [Transpose] button to

nish the procedure.

Restoring the Factory Settings

(Factory Reset)

Settings that you’ve stored using the Memory Backup function (p. 39)

can be returned to their factory-set state. This is called the “factory

reset” function.

NOTE

When you execute “Factory Reset,” all stored settings will be

erased and returned to the factory settings.

MEMO

This function will not erase the songs from the internal memory

or the USB ash drive (sold separately).

If you want to erase the internal memory or the USB ash drive,

“Initializing the Memory (Format Media)” (p. 41).

1. While holding down the [Key Touch] button, press the

[Transpose] button.

Operation Guide Panel Descriptions Before You Play Performing Practicing

Convenient Functions

Appendix

Function Mode

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Roland DP90Se Seite 39

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info