Bedienungsanleitung Roland DP90Se (Seite 44 von 68) (Englisch)

710534

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

Convenient Functions

Wireless LAN Function Settings

You can view or edit the wireless settings.

Basic Operation

1. While holding down the [Key Touch] button, press the

[Transpose] button.

2. Press the [ ] [ ] (Slow/Fast) buttons to select the

“Wireless,” then press the [Song] button.

3. Press the [ ] [ ] (Slow/Fast) buttons to select menu,

then press the [Song] button.

Menu Explanation

Status This shows the wireless LAN status.

Connect Connect to a wireless LAN access point.

Option Make settings for Wireless ID or Ad-Hoc mode (p. 45).

In the explanations in this Chapter, procedures will be

indicated using arrows, like this: “Wireless” g “Status.”

Status Indication

This shows the wireless LAN status.

1. Select “Wireless” g “Status.”

The status screen will appear.

Display Explanation

Signal level:

Strong

Currently connected to the wireless LAN access point.

Three bars are used to indicate the signal level (the

strength of the connected wireless LAN access point’s

radio signal).

The identier (name) of the connected wireless LAN

access point is shown.

Signal level:

Middle

Signal level:

Weak

Not Con

The wireless USB adapter is inserted, but not

connected to a wireless LAN access point.

NotAvail The wireless USB adapter is not inserted.

DP90S/90

SSID

Ad-Hoc mode (p. 45).

The Ad-Hoc SSID is shown. Press the [

] (Fast)

button to display the Ad-Hoc key.

For details, refer to “Connecting in Ad-Hoc Mode”

(p. 45).

2. Press the [ ] (Fast) button to display the IP address.

Connecting to a Wireless LAN Access

Point That You Select (Select AP)

This method lets you connect by choosing a wireless LAN access

point from the list that is displayed.

* Wireless standards 802.11g/n (2.4 GHz) and authentication

methods WPA/WPA2 are supported.

1. Select “Wireless” g”Connect” g “Select AP,” then press the

[Song] button.

The Select Access Point screen will appear.

An “*” symbol is shown for the currently-connected wireless LAN

access point.

2. Press the [–] [+] button to choose the wireless LAN access

point to which you want to connect, and press the [Song]

button.

• You will be connected to the selected wireless LAN access point.

• If you’re using this wireless LAN access point for the rst time,

you’ll proceed to the authorization (PASS) screen.

• If t

his is a wireless LAN access point to which you have

connected in the past, just press the [Song] button and you’ll be

connected. Once successfully connected, “Success” will appear.

Authorization screen (PASS)

3. Enter the security code (passphrase) of your wireless LAN

access point, and press the [Song] button.

How to enter characters

Use the [

] [ ] (Slow/Fast) buttons to select the position at

which you want to specify a character. Use the [–] [+] buttons to

change the character.

* You cannot enter a space at the end of the passphrase.

Once successfully connected, “Success” will appear.

* If you fail to connect, refer to “Problems when connecting to a

wireless LAN” (p. 52).

4. Press the [Key Touch] or [Transpose] button to exit

Function mode.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Roland DP90Se Seite 44

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info