Bedienungsanleitung Roland E-09 (Seite 2 von 19) (Englisch)

97865

Zoom out

Zoom in

Vorherige Seite

1/19

Nächste Seite

Roland E-09 MIDI Implementation

❍

Sostenuto (Controller number 66)

Status

2nd byte 3rd byte

BnH 42H vvH

n = MIDI channel number: 0H - FH (ch.1 - 16)

vv = Control value: 00H - 7FH (0 - 127) 0 - 63 = OFF, 64 - 127 = ON

* Not received when Rx.SOSTENUTO = OFF. (Initial value is ON)

❍

Soft (Controller number 67)

Status

2nd byte 3rd byte

BnH 43H vvH

n = MIDI channel number: 0H - FH (ch.1 - 16)

vv = Control value: 00H - 7FH (0 - 127) 0 - 63 = OFF, 64 - 127 = ON

* Not received when Rx.SOFT = OFF. (Initial value is ON)

❍

Filter Resonance (Timbre/Harmonic Intensity) (Controller number 71)

Status

2nd byte 3rd byte

BnH 47H vvH

n = MIDI channel number: 0H - FH (ch.1 - 16)

vv= Resonance value (relative change): 00H - 40H - 7FH (-64 - 0 - +63), Initial value = 40H

(no change)

❍

Release Time (Controller number 72)

Status

2nd byte 3rd byte

BnH 48H vvH

n = MIDI channel number: 0H - FH (ch.1 - 16)

vv = Release Time value (relative change): 00H - 40H - 7FH (-64 - 0 - +63), Initial value = 40H

(no change)

❍

Attack time (Controller number 73)

Status

2nd byte 3rd byte

BnH 49H vvH

n = MIDI channel number: 0H - FH (ch.1 - 16)

vv = Attack time value (relative change): 00H - 40H - 7FH (-64 - 0 - +63), Initial value = 40H

(no change)

❍

Cutoff (Controller number 74)

Status

2nd byte 3rd byte

BnH 4AH vvH

n = MIDI channel number: 0H - FH (ch.1 - 16)

vv = Cutoff value (relative change): 00H - 40H - 7FH (-64 - 0 - +63), Initial value = 40H (no

change)

❍

Decay Time (Controller number 75)

Status

2nd byte 3rd byte

BnH 4BH vvH

n = MIDI channel number: 0H - FH (ch.1 - 16)

vv = Decay Time value (relative change): 00H - 40H - 7FH (-64 - 0 - +63), Initial value = 40H

(no change)

❍

Vibrato Rate (Controller number 76)

Status

2nd byte 3rd byte

BnH 4CH vvH

n = MIDI channel number: 0H - FH (ch.1 - 16)

vv = Vibrato Rate value (relative change): 00H - 40H - 7FH (-64 - 0 - +63), Initial value = 40H

(no change)

❍

Vibrato Depth (Controller number 77)

Status

2nd byte 3rd byte

BnH 4DH vvH

n = MIDI channel number: 0H - FH (ch.1 - 16)

vv = Vibrato Depth Value (relative change): 00H - 40H - 7FH (-64 - 0 - +63), Initial value =

40H (no change)

❍

Vibrato Delay (Controller number 78)

Status

2nd byte 3rd byte

BnH 4EH vvH

n = MIDI channel number: 0H - FH (ch.1 - 16)

vv = Vibrato Delay value (relative change): 00H - 40H - 7FH (-64 - 0 - +63), Initial value =

40H (no change)

❍

Portamento control (Controller number 84)

Status

2nd byte 3rd byte

BnH 54H kkH

n = MIDI channel number: 0H - FH (ch.1 - 16)

kk = source note number: 00H - 7FH (0 - 127)

* A Note-on received immediately after a Portamento Control message will change

continuously in pitch, starting from the pitch of the Source Note Number.

* If a voice is already sounding for a note number identical to the Source Note Number,

this voice will continue sounding (i.e., legato) and will, when the next Note-on is

received, smoothly change to the pitch of that Note-on.

* The rate of the pitch change caused by Portamento Control is determined by the

Portamento Time value.

Example 1.

On MIDI Description Result

90 3C 40 Note on C4 C4 on

B0 54 3C Portamento Control from C4 no change

90 40 40 Note on E4 glide from C4 to E4

80 3C 40 Note off C4 no change

80 40 40 Note off E4 E4 off

Example 2.

On MIDI Description Result

B0 54 3C Portamento Control from C4 no change

90 40 40 Note on E4 E4 is played with a glide from C4 to E4

80 40 40 Note off E4 E4 off

❍

Effect 1 (Reverb Send Level) (Controller number 91)

Status

2nd byte 3rd byte

BnH 5BH vvH

n = MIDI channel number: 0H - FH (ch.1 - 16)

vv = Reverb Send Level: 00H - 7FH (0 - 127), Initial value = 28H (40)

* This message adjusts the Reverb Send Level of each Part.

❍

Effect 3 (Chorus Send Level) (Controller number 93)

Status

2nd byte 3rd byte

BnH 5DH vvH

n = MIDI channel number: 0H - FH (ch.1 - 16)

vv = Chorus Send Level: 00H - 7FH (0 - 127), Initial value = 00H (0)

* This message adjusts the Chorus Send Level of each Part.

❍

NRPN MSB/LSB (Controller number 99, 98)

Status

2nd byte 3rd byte

BnH 63H mmH

BnH 62H llH

n = MIDI channel number: 0H - FH (ch.1 - 16)

mm = upper byte (MSB) of parameter number specified by NRPN

ll = lower byte (LSB) of parameter number specified by NRPN

* Rx.NRPN is set to OFF by power-on reset or by receiving “GM1 System On” or “GM2

System On,” and NRPN message will be ignored. NRPN message will be received when

Rx.NRPN = ON, or by receiving GS RESET.

* The value set by NRPN will not be reset even if Program Change or Reset All Controllers

is received.

NRPN

The NRPN (Non Registered Parameter Number) message allows an extended range of

control changes to be used. On the E-09, NRPN messages can be used to modify sound

parameters, etc.

To use these messages, you must first use NRPN messages (Controller number 98 and 99,

their order does not matter) to specify the parameter to be controlled, and then use Data

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Roland E-09 Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Roland E-09

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info