Bedienungsanleitung Roland E-09 (Seite 5 von 19) (Englisch)

97865

Zoom out

Zoom in

Vorherige Seite

1/19

Nächste Seite

Roland E-09 MIDI Implementation

●

System Exclusive messages related to mode settings

These messages are used to initialize a device to GS or General MIDI mode, or change the

operating mode. When creating performance data, a “GM1 System On” message should be

inserted at the beginning of a General MIDI 1 score, a “GM2 System On” message at the

beginning of a General MIDI 2 score, and a “GS Reset” message at the beginning of a GS

music data. Each song should contain only one mode message as appropriate for the type of

data. (Do not insert two or more mode setting messages in a single song.) “GM System On”

uses Universal Non-realtime Message format. “GS Reset” uses Roland System Exclusive

format “Data Set 1 (DT1)”.

❍

GM1 System On

“GM1 System On” is a command message that resets the internal settings of the unit to the

General MIDI 1 initial state. After receiving this message, the E-09 will automatically be set

to the proper condition for correctly playing a General MIDI 1 score.

Status

Data byte Status

F0H 7EH, 7FH, 09H, 01H F7H

Byte Explanation

F0H Exclusive status

7EH ID number (Universal Non-realtime Message)

7FH Device ID (Broadcast)

09H Sub ID#1 (General MIDI Message)

01H Sub ID#2 (General MIDI 1 On)

F7H EOX (End Of Exclusive)

* When this message is received, Rx.BANK SELECT will be OFF and Rx.NRPN will be

OFF.

* There must be an interval of at least 50 ms between this message and the next.

❍

GM2 System On

“GM2 System On” is a command message that resets the internal settings of the unit to the

General MIDI 2 initial state. After receiving this message, the E-09 will automatically be set

to the proper condition for correctly playing a General MIDI 2 score.

Status

Data byte Status

F0H 7EH, 7FH, 09H, 03H F7H

Byte Explanation

F0H Exclusive status

7EH ID number (Universal Non-realtime Message)

7FH Device ID (Broadcast)

09H Sub ID#1 (General MIDI Message)

03H Sub ID#2 (General MIDI 2 On)

F7H EOX (End Of Exclusive)

* When this message is received, the E-09 will be able to receive the messages specified by

General MIDI 2, and use the General MIDI 2 sound map.

* There must be an interval of at least 50 ms between this message and the next.

❍

GM System Off

“GM System Off” is a command message that resets the internal state of the E-09 from the

GM state to its native condition.

Status

Data byte Status

F0H 7EH, 7FH, 09H, 02H F7H

Byte Explanation

F0H Exclusive status

7EH ID number (Universal Non-realtime Message)

7FH Device ID (Broadcast)

09H Sub ID#1 (General MIDI Message)

02H Sub ID#2 (General MIDI Off)

F7H EOX (End Of Exclusive)

* When this messages is received, the E-09 will reset to the GS default state.

* There must be an interval of at least 50 ms between this message and the next.

❍

GS Reset

“GS Reset” is a command message that resets the internal settings of the E-09 to the GS

initial state. This message appears at the beginning of GS music data, and a GS device that

receives this message will automatically be set to the proper state to correctly play back GS

music data.

Status

Data byte Status

F0H 41H, dev, 42H, 12H, 40H, 00H, 7FH, 00H, 41H F7H

Byte

Explanation

F0H Exclusive status

41H ID number (Roland)

dev Device ID (dev: 00H - 1FH (1 - 32), Initial value is 10H (17))

42H Model ID (GS)

12H Command ID (DT1)

40H Address MSB

00H Address

7FH Address LSB

00H Data (GS reset)

41H Checksum

F7H EOX (End Of Exclusive)

* When this message is received, Rx.NRPN will be ON.

* There must be an interval of at least 50 ms between this message and the next.

●

Universal Non-realtime System Exclusive Message

❍

Identity Request Message

Status

Data byte Status

F0H 7EH, dev, 06H, 01H F7H

Byte Explanation

F0H Exclusive status

7EH ID number (Universal Non-realtime Message)

dev Device ID (dev: 10H - 1FH, 7FH)

06H Sub ID#1 (General Information)

01H Sub ID#2 (Identity Request)

F7H EOX (End Of Exclusive)

* When this message is received, Identity Reply message will be transmitted.

●

Universal Realtime System Exclusive Messages

❍

Master Volume

Status

Data byte Status

F0H 7FH, 7FH, 04H, 01H, llH, mmH F7H

Byte Explanation

F0H Exclusive status

7FH ID number (universal realtime message)

7FH Device ID (Broadcast)

04H Sub ID#1 (Device Control)

01H Sub ID#2 (Master Volume)

llH Master Volume lower byte

mmH Master Volume upper byte

F7H EOX (End Of Exclusive)

* The lower byte (llH) of Master Volume will be handled as 00H.

❍

Master Fine Tuning

Status

Data byte Status

F0H 7FH, 7FH, 04H, 03H, llH, mmH F7H

Byte Explanation

F0H Exclusive status

7FH ID number (universal realtime message)

7FH Device ID (Broadcast)

04H Sub ID#1 (Device Control)

03H Sub ID#2 (Master Fine Tuning)

llH Master Fine Tuning LSB

mmH Master Fine Tuning MSB

F7H EOX (End Of Exclusive)

mm, ll: 00 00H - 40 00H - 7F 7FH (-100 - 0 - +99.9 [cents])

❍

Master Coarse Tuning

Status

Data byte Status

F0H 7FH, 7FH, 04H, 04H, llH, mmH F7

Byte Explanation

F0H Exclusive status

7FH ID number (universal realtime message)

7FH Device ID (Broadcast)

04H Sub ID#1 (Device Control)

04H Sub ID#2 (Master Coarse Tuning)

llH Master Coarse Tuning LSB

Roland E-09 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Roland E-09

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info