Bedienungsanleitung Roland GP-3 (Seite 11 von 22) (Englisch)

805070

Zoom out

Zoom in

Vorherige Seite

1/22

Nächste Seite

°Advanced Features

Outputting Sound from Both Headphones and the

Built-in Speakers (Speaker Auto Mute)

By factory default, the built-in speakers are set not to make sound when

you connect a pair of headphones into the Phones jack. By changing the

settings, you can make sound come from both the headphones and the

built-in speakers.

* Changing the settings also changes the tonal character of the sound

you hear in your headphones.

1. Press the [ ] button while holding down the [ ] (volume +)

button and the [ ] (volume -) button.

2. Press the [ ] button to switch between settings.

When headphones are connected to

the Phones jack Volume indicator display

Sound comes only from

headphones

(default setting)

Blink

Lit

Sound comes from both

headphones and built-in speakers

Blink

Unlit

3. To exit settings, press the [ ] (volume +) button or the [ ]

(volume -) button.

Saving the Settings (Memory Backup)

This piano remembers the “settings that are saved automatically” even

when the power is turned o and then on again. If you set the “Memory

Backup” setting, the settings saved by memory backup are stored as well.

Other settings return to their default values when you turn the power o

and on again.

1. Hold down the [ ] button and press the [ ] (volume +)

button.

Blink

Lit

Unlit

2. Press the [ ] (volume +) button.

The current settings are saved.

To cancel, press the [ ] (volume -) button or the [ ] button.

Settings that are saved automatically Page

Speaker volume p. 7

Headphone volume p. 7

Bluetooth On/O p. 2

USB Audio/Bluetooth Volume p. 3

Auto-o p. 3

Settings that are saved by “Memory Backup” Page

Sound ambience (Ambience) p. 2

Brilliance (Brilliance) p. 2

Piano Reality Headphones Ambience p. 2

Key Touch p. 3

Master tuning p. 3

Metronome (Volume) p. 2

SMF Play Mode p. 2

Speaker Auto Mute p. 11

Returning to the Factory Settings (Factory Reset)

Here’s how to restore all registrations and internally saved settings to the

factory-set condition. This function is called “Factory Reset”.

NOTE

When you perform a factory reset, all settings are initialized, and the

songs recorded in internal memory are erased.

1. Turn on the power while holding down the [ ] (volume +) and

[ ] (volume -) buttons, and keep holding the [ ] (volume +)

and [ ] (volume -) buttons.

Take your ngers o the buttons once the volume indicators light up

as shown below.

Blink

Lit

Unlit

2. Press the [ ] (volume +) button.

The factory reset is executed.

To cancel, press the [ ] (volume -) button or the [ ] button.

Now executing factory reset

Blink

Completed Blink

* Never turn o the power while the factory reset is in progress.

3. Once the volume indicators show the “Completed” status, turn

the power o and then on again.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Roland GP-3 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Roland GP-3

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info