38
° IMPORT
Placement
• Do not allow lighting devices that normally are used
while their light source is very close to the unit (such
as a piano light), or powerful spotlights to shine upon
the same area of the unit for extended periods of time.
Excessive heat can def
• Do not allow objects to remain on top of the keyboard.
This can be the cause of malfunction, such as keys
ceasing to produce sound.
Care of the Keyboard
• Do not write on the keyboard with any pen or other
implement, and do not stamp or place any marking on
the instrument. Ink will seep into the surface lines and
become unremovable
• Do not ax stickers on the keyboard.
unable to remove stickers that use str
and the adhesive may cause discoloration.
• T
keyboard cleaner that does not contain abrasiv
by wiping lightly
using gradually increasing amounts of pressur
taking care not to scratch the keys.
Concerning the Care of the Unit (Mirror Finish)
• The surface of this unit has been polished so as
to create a high-gloss, mirror-like nish. Sinc
beautiful nish is as delicate as that of the highest
quality, w
at regular intervals. Please make sure to observe the
following when caring for the unit.
• For r
cloth or a piano-use feather duster
applying any forc
of sand or grit can produce scratches if y
too hard.
• If the nish loses its luster
dampened with some polishing liquid to evenly
wipe the surface of the unit.
• Avoid using deter
cause the surface nish to deteriorate.
to the formation of cracks or other imperfections.
Also, do not use chemically-enhanced cleaning
cloths.
• Precautions concerning the use of polishing agents
• Refer to the instructions that came with the
polishing agent for instructions on its proper use.
• Use only polishing agents that are designed
specically for use on the mirror nishes of pianos.
By using any other product, you risk causing
scratches, def
purchase an appropriate product, please consult the
nearest musical instrument store
• Use the product only on the portions of this unit that
have a mirror-like nish, and using an ev
apply it equally over the entire surface. If you apply
more forc
some of the luster of the nish.
• Store in a location that is out of the reach of small
children. If accidentally ingested, induce v
immediately
diagnosis.
Repairs and Data
• Before sending the unit awa
write down the needed information. Although we will
do our utmost to preserve the data stored in your unit
when we carry out repairs, in some cases, such as when
the memory section is physically damaged, restoration
of the stored content ma
assumes no liability concerning the restoration of any
stored content tha
Additional Precautions
• Any data stored within the unit can be lost as the r
of equipment failure, incorrect operation, et
yourself against the irretrievable loss of data, be sure to
write down the needed information.
• Roland assumes no liability concerning the restoration
of any stored con
• Never strike or apply strong pressure t
• The sound of keys being struck and vibrations produced
by playing an instrument can be transmitted thr
oor or wall to an unexpected extent. Please take care
not to cause annoyance to others nearby
• Do not apply undue force to the music r
in use.
• Do not use connection cables that contain a built-in
resistor
Using External Memories
• Please observe the following precautions when
handling external memory devices. Also, make sure to
carefully observe all the precautions that were supplied
with the external memory device.
• Do not remove the device while r
in progress.
• T
all static electricity from your person before
handling the device.
Caution Regarding Radio Frequency Emissions
• The following actions may subject you to penalty of law
• Disassembling or modifying this device.
• Removing the certication label axed to the back
of this device.
• Using this device in a country other than where it
was purchased
Intellectual Propert
• It is forbidden by law to make an audio recor
video recording
copyrighted work (musical work, video work, broadcast,
live performance, or other work), whether in whole or in
part, and distribute, sell, lease, perform or broadcast it
without the permission of the copyright owner
• Do not use this product for purposes that could
infringe on a copyright held by a third party.
assume no responsibility whatsoever with regard t
infringements of third-party copyrights arising through
your use of this product.
• The copyright of conten
waveform data, style data, acc
phrase data, audio loops and image data) is reserved by
Roland Corporation.
• Purchasers of this product are permitted t
content (exc
the creating, performing, rec
original musical works.
• Purchasers of this product are NO
extract said content in original or modied form, for
the purpose of distributing recorded medium of said
content or making them available on a computer
network.
• Roland is either registered trademarks or trademarks of
Roland Corporation in the United States and/or other
countries.
• Company names and product names appearing in this
document are register
their respective owners.
• This product contains eP
platform of eSOL Co
Co., L
• The Bluetooth ® word mark and logos are r
trademarks owned by Bluetooth SIG, Inc. and any use
of such marks by Roland is under license.
• This Product uses the Source C
T
tron.org).
• The
GB2313BMP12”
Morisawa Corporation, and copyright to the f
the property of that corporation.
• This product includes third party open source software.
Copyright © 2009-2018 Arm Limited. All rights r
Copyright © 2018 STMicroelectronics. All rights
reserved.
Licensed under the Apache License,
“License”);
Y
http://www.apache.or
Copyright © 2018 STMicroelectronics. All rights
reserved.
This software component is licensed by ST under BSD
3-Clause license, the
Y
https://opensource.or
• This product is using the Jansson (http://www.digip
org/jansson/) source code
Copyright © 2009-2016 P
etri Lehtinen <petri@digip
.
org> Released under the MIT license http://opensource
org/licenses/mit-license.php
