Bedienungsanleitung Roland Juno Di (Seite 66 von 136) (Englisch)

499471

Zoom out

Zoom in

Vorherige Seite

1/136

Nächste Seite

Detailed Settings for Performance Functions

Modifying the tonal character

([CUTOFF]/[RESONANCE] knobs)

You can use these knobs to adjust the filter that cuts or boosts specific

frequency regions of the sound.

These affect the following parameters of the currently selected tone.

Items indicated by an “*” in the table are displayed in the

included “JUNO-Di Editor.”

Adding Reverberation ([REVERB] Knob)

You can add reverb (reverberation) to the sounds that you play from the

keyboard.

By adding reverb, you can recreate the pleasant acoustics that are typical

of a performance in a concert hall or similar space.

The effect will be applied when “Reverb Switch” is turned “ON”

in the effect edit screen. Refer to “Editing the Effects (MFX/

Chorus/Reverb) (Effect Edit)” (p. 61).

For more about the Split function, refer to “Playing with a

Different Tone for Each Hand—[SPLIT] Button” (p. 33).

When using Split keyboard mode, you can change the split point (the

location at which the keyboard is divided).

To change the split point, you can either specify the split point key (p. 33)

or use the following shortcut.

With the [SPLIT] button lit, hold down the [SHIFT] button

and press the [SPLIT] button.

The current setting will appear.

fig.disp-splitpoint.eps

Use the dial to specify the desired split point.

Range:

C#2–C7

The split point is the lowest key of the Upper part.

When you have made the setting, press the [EXIT]

button.

When using settings that allow you to play a single tone (i.e., when the

[PERFORM] button is unlit), here’s how you can make the currently

selected tone the Lower tone of the split.

* Normally, when you press the [SPLIT] button to turn Split on, the

currently selected tone will be assigned as the Upper tone.

Hold down the [

] button and press the [SPLIT] button

so it’s lit.

Split will turn on, and the currently selected tone will be the Lower

tone.

When Split or Dual (p. 31) are on, here’s how to exchange the two

selected tones.

•

With the cursor located at the tone number for upper (U) or

part 1 (1) hold down the [SHIFT] button and press the [

]

button.

•

With the cursor located at the tone number for lower (L) or

part 2 (2), hold down the [SHIFT] button and press the [

]

button.

[CUTOFF] knob

Adjusts the frequency (cutoff frequency) at

which the filter begins to be applied.

Turning the knob toward the right will

brighten the sound, and turning it toward

the left will darken the sound.

What is affected by the change

(JUNO-Di setting)

Item Value

Each part

([PERFORM] button lit)

COF OFFSET *

(Cutoff Offset)

-64–+63

Tone

([PERFORM] button extinguished)

CUTOFF OFFSET * -63–+63

Rhythm Set

([PERFORM] button extinguished)

UTOFF * 0–127

[RESONANCE] knob

Boosts the sound in the vicinity of the

cutoff frequency, adding a distinctive

character to the sound.

Turning the knob toward the right will

strengthen this character, and turning the

knob toward the left will weaken it.

What is affected by the change

(JUNO-Di setting)

Item Value

Each part

([PERFORM] button lit)

RES OFFSET *

(Resonance Offset)

-64–+63

Tone

([PERFORM] button extinguished)

RES OFFSET *

(Resonance Offset)

-63–+63

Rhythm Set

([PERFORM] button extinguished)

RES *

(Resonance)

0–127

[REVERB] knob

Adjusts the amount of reverb.

Turning the knob toward the right will deepen

the reverb, and turning it toward the left will

decrease the reverb.

Item

Value

Reverb Level

0–127

Split Settings

Changing the Split Point

Making the Selected Tone the Lower Tone

of a Split

Exchanging the Two Tones in Split/Dual Mode

JUNO-Di_e.book 66 ページ２００９年６月２２日　月曜日　午前９時２３分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Roland Juno Di Seite 66

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info