Bedienungsanleitung Roland Juno Di (Seite 82 von 136) (Englisch)

499471

Zoom out

Zoom in

Vorherige Seite

1/136

Nächste Seite

Connecting an External MIDI Device

You can use the JUNO-Di as a MIDI sound module in one of two ways; in

Patch mode to play a single tone, or in Performance mode to play more

than one tone simultaneously.

Patch mode

In Patch mode you can use a connected keyboard or other device to play

a single tone (patch) on the JUNO-Di. Since Patch mode lets you use a

variety of effects on a single tone (patch), you can play very rich textures.

In Patch mode it’s also easy to edit the selected sound, so this is the mode

to use when editing or creating your own sounds.

In Patch mode, the [PERFORM] button will be extinguished.

Performance mode

In Performance mode you can use multiple tones (patches) or rhythm

sets simultaneously.

If the [PERFORM] button is on (lit), the JUNO-Di is in Performance mode.

A performance contains sixteen “Parts.” You can assign a tone (patch) or

rhythm set to each part, and use them as an ensemble, or layer sounds to

create rich textures.

How a performance is structured

A performance has a tone (patch) or rhythm set assigned to each of the

16 parts, and can simultaneously handle 16 sounds.

Part

A “part” is something to which you assign a tone (patch) or rhythm set. In

Performance mode, each performance has sixteen parts, and you can

assign a tone (patch) or rhythm set to each part.

fig.Performance-e.eps

Connection example

fig.midi-receive-j.eps

You’ll need to match your external MIDI device’s transmit channel with

the JUNO-Di’s receive channel.

In Patch mode

The receive channel setting is one of the “system settings.” As described

in “Procedure for Making System Settings” (p. 75), select the “MIDI”

menu, select “Patch Rx/Tx Ch” as the item you want to set, and specify the

receive channel.

In Performance mode

The JUNO-Di supports GM2; when it receives the MIDI message “GM2

System On,” it will be ready to play back GM2-compatible SMF.

Alternatively, you can press the [PERFORM] button and select “64: GM2

Template” to use the JUNO-Di as a GM2 sound module.

If you want to use the JUNO-Di as a sound module to play multiple parts,

press the [PERFORM] button and select “63:Seq:Template.”

• If “63: Seq:Template” or “64: GM2 Template” are selected, the receive

channels will be set as follows: part 1 to ch.1, part 2 to ch.2, ... part 16

to ch.16.

• If Super Layer is selected, the receive channel is fixed at channel 1.

• If Dual or Split are selected, the receive channel for part 1 (upper) is

set to channel 1, and part 2 (lower) to channel 2.

Using the JUNO-Di as a MIDI Sound

Module

Performance

Part 16

Part 1

Patch/

Rhythm Set

Playing the JUNO-Di from an

External MIDI Device

Setting the Receive Channel

MIDI Sequencer

MIDI OUT

MIDI IN

JUNO-Di

JUNO-Di_e.book 82 ページ２００９年６月２２日　月曜日　午前９時２３分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Roland Juno Di Seite 82

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info