Bedienungsanleitung Roland KC-200 (Seite 5 von 12) (Englisch)

669158

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

USING THE UNIT SAFELY

CAUTION

When disconnecting the power cord, grasp it by the

plug

To prevent conductor damage, always

grasp the power cord by its plug when

disconnecting it.

Periodically clean the power plug

An accumulation of dust or foreign objects

between the power plug and the power

outlet can lead to re or electric shock.

At regular intervals, be sure to pull out

the power plug, and using a dry cloth,

wipe away any dust or foreign objects that may have

accumulated.

Disconnect the power plug whenever the unit will

not be used for an extended period of time

Fire may result in the unlikely event that a

breakdown occurs.

Route all power cords and cables in such a way as

to prevent them from getting entangled

Injury could result if someone were to

trip on a cable and cause the unit to fall

or topple.

CAUTION

Avoid climbing on top of the unit, or placing heavy

objects on it

Otherwise, you risk injury as the result of

the unit toppling over or dropping down.

Never connect/disconnect a power plug if your

hands are wet

Otherwise, you could receive an electric

shock.

Disconnect all cords/cables before moving the unit

Before moving the unit, disconnect the

power plug from the outlet, and pull out all

cords from external devices.

Before cleaning the unit, disconnect the power

plug from the outlet

If the power plug is not removed from the

outlet, you risk receiving an electric shock.

CAUTION

Whenever there is a threat of lightning, disconnect

the power plug from the outlet

If the power plug is not removed from the

outlet, you risk causing malfunction or

receiving an electric shock.

Do not remove the speaker grille and speaker

Do not remove the speaker grille and

speaker by any means. Speaker is not user

replaceable. Shock hazardous voltages and

currents are present inside the enclosure.

IMPORTANT NOTES

Power Supply

• Do not connect this unit to same electrical outlet

that is being used by an electrical appliance that

is controlled by an inverter or a motor (such as a

refrigerator, washing machine, microwave oven, or

air conditioner). Depending on the way in which

the electrical appliance is used, power supply noise

may cause this unit to malfunction or may produce

audible noise. If it is not practical to use a separate

electrical outlet, connect a power supply noise lter

between this unit and the electrical outlet.

Placement

• Using the unit near power ampliers (or other

equipment containing large power transformers)

may induce hum. To alleviate the problem, change

the orientation of this unit; or move it farther away

from the source of interference.

• Noise may be produced if wireless communications

devices, such as cell phones, are operated in the

vicinity of this unit. Such noise could occur when

receiving or initiating a call, or while conversing.

Should you experience such problems, you should

relocate such wireless devices so they are at a

greater distance from this unit, or switch them o.

• Do not allow lighting devices that normally are used

while their light source is very close to the unit (such

as a piano light), or powerful spotlights to shine

upon the same area of the unit for extended periods

of time. Excessive heat can deform or discolor the

unit.

• When moved from one location to another where

the temperature and/or humidity is very dierent,

water droplets (condensation) may form inside

the unit. Damage or malfunction may result if you

attempt to use the unit in this condition. Therefore,

before using the unit, you must allow it to stand for

several hours, until the condensation has completely

evaporated.

• Do not paste stickers, decals, or the like to this

instrument. Peeling such matter o the instrument

may damage the exterior nish.

• Depending on the material and temperature of the

surface on which you place the unit, its rubber feet

may discolor or mar the surface.

• Do not place containers or anything else containing

liquid on top of this unit. Also, whenever any liquid

has been spilled on the surface of this unit, be sure

to promptly wipe it away using a soft, dry cloth.

Maintenance

• Never use benzine, thinners, alcohol or solvents of

any kind, to avoid the possibility of discoloration

and/or deformation.

Additional Precautions

• Use a reasonable amount of care when using the

unit’s buttons, sliders, or other controls; and when

using its jacks and connectors. Rough handling can

lead to malfunctions.

• When disconnecting all cables, grasp the connector

itself—never pull on the cable. This way you will

avoid causing shorts, or damage to the cable’s

internal elements.

• A small amount of heat will radiate from the unit

during normal operation.

• To avoid disturbing others nearby, try to keep the

unit’s volume at reasonable levels.

• Do not use connection cables that contain a built-in

resistor.

Intellectual Property Right

• Roland is either registered trademarks or trademarks

of Roland Corporation in the United States and/or

other countries.

• Company names and product names appearing

in this document are registered trademarks or

trademarks of their respective owners.

Roland KC-200 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Roland KC-200

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info