Bedienungsanleitung Roland LX-17 (Seite 10 von 30) (Englisch)

674614

Zoom out

Zoom in

Vorherige Seite

1/30

Nächste Seite

It’s easy to record your own performances.

You can play back a recorded performance to check your playing, or

play along with a recorded performance.

Type of recording

SMF recording

5 Parts will be separate.

5 You can re-record a specic portion of the song.

5 You can overdub.

Audio recording

5 Your performance will be recorded as audio data.

5 The recorded song can be used on your computer.

* The acoustic projection eect (*1) is not reproduced for

an audio-recorded song.

* In order to use audio recording, you must connect a USB

ash drive (sold separately) to the USB Memory port.

*1 Acoustic projection is an eect that plays dierent sounds from each of this

unit’s multiple speakers in order to reproduce the depth and spatial sense

of a piano’s sound. This eect is applied when you play the keyboard, and

when you play back a song that was recorded as SMF.

SMF Recording

Recording a New Song

SMF recording is convenient when you want an easy way to record

your performance.

* If you want to record with Twin Piano turned on, set SMF Play

Mode (p. 19) to “External.”

Getting ready to record

423

1. Select the tone that you want to play (p. 6).

2. You can sound the metronome if you like (p. 8).

You can specify the tempo and time signature of the metronome.

MEMO

The metronome’s tempo and time signature settings are stored in

the song, so that the metronome plays correctly even when you

play back the song.

3. Press the [t] button.

The [t] button lights, the [s] button blinks, and the unit enters

record-standby mode.

If you decide to cancel recording, press the [t] button once again.

4. Press the part button of the part that you want to record,

making it blink.

MEMO

For example you can record your performance separately for

each hand by pressing the [Left] button to record your left-

hand performance or pressing the [Right] button to record your

right-hand performance. You can also re-record each part after

recording.

* If you don’t select a part at this time, your performance is

recorded to the following buttons.

When playing a single tone [Right] button

Split Play

[Right] button and [Left] button

Twin piano play

Dual Play [Right] button and [Accomp] button

Starting your recording and saving it

1 2

1. Press the [s] button.

After a two-measure count is sounded (the measure number in the

lower right of the display indicates “-2” and then “-1”), recording

starts.

When recording starts, the [t] button and [s] button light.

MEMO

You can also start recording by playing the keyboard. In this case,

a count is not sounded.

2. Press the [s] button.

Recording stops, and your performance is automatically saved.

MEMO

5 You can change the name of the song (p. 11).

5 You can delete the song (p. 12).

NOTE

Never turn o the power while “Saving...” is shown in the display.

Listening to the recorded performance

After you record, the newly recorded song is selected.

1. Press the [s] button.

Playback starts from the beginning of your recorded performance.

Overdubbing a Recorded Song

You can overdub additional parts onto an SMF recording. For

example, you can separately record the left-hand and right-hand

performances, or record along with an existing song.

* When overdubbing dierent tones, set the SMF Play Mode (p. 19)

to “External.”

1. Select the song onto which you want to overdub (p. 9).

MEMO

If you want to rerecord only a portion of the song, use the [x]

[y] buttons to move to the measure at which you want to start

recording.

2. Press the [t] button.

The [t] button lights, and the unit enters record-standby mode.

In this case, New Song is selected.

If you decide to cancel recording, press the [t] button once again.

3. Press the cursor [J] button.

The song you selected in step 1 is selected.

MEMO

The song’s tempo and time signature follow the settings of the

song you select.

4. Press the part button of the part that you want to record,

making it blink.

Parts whose button is lit will play back during recording.

5. Start recording as described in “Starting your recording

and saving it” (p. 10).

Recording Your Performance

Advanced Operation

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Roland LX-17 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Roland LX-17

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info