Bedienungsanleitung Roland LX705 (Seite 15 von 38) (Englisch)

755955

Zoom out

Zoom in

Vorherige Seite

1/38

Nächste Seite

Recording Your Performance

Overdubbing a Recorded Performance

After recording one hand of your performance, you can overdub-

record the performance of the other hand.

You can also overdub-record onto a built-in song.

Left (or right) part Right (or left) part

Getting ready to record

1. Press the [ ] button.

The Song screen appears.

MEMO

If the measure screen appears, press the [ ] button to return to

the song-select screen.

2. Turn the [ ] knob to select the category of the song

that you want to overdub, and press the [ ] knob to

conrm.

3. Turn the [ ] knob to select the song that you want

to overdub.

You can select songs within the category.

MEMO

If you’re recording your performance along with a built-in song,

you can x the tempo of the built-in song (p. 12).

4. Press the [t] button.

The [t] button lights, the [s] button blinks, and the piano

enters record-standby mode.

If you decide to cancel recording, press the [t] button once again.

5. Turn the [ ] knob to access the “Overdub” screen.

The song of step 3 is selected.

6. Press the [Part] button; if a part that you don’t want to

record is blinking, turn the [ ] knob to select the part,

and press the [ ] knob to make it go dark.

If you select a part that is already recorded (lit) and then press the

[ ] knob to make it blink, that part will be overwrite-recorded.

Starting/stopping recording

7. Press the [s] button.

After a one-measure count, recording starts, and the [7]

button and [s] button are both lit. The performance is saved

automatically.

MEMO

You can also start recording by playing the keyboard instead of

pressing the [s] button. In this case, a count is not sounded.

8. To stop recording, press the [s] button once

again.

Recording stops.

Recording Audio to USB Flash Drive

If you audio-record your performance, you’ll be able to listen to it on

your computer or audio player, use it to create a music CD, or publish

it on the internet.

Getting ready to record

1. Connect your USB ash drive to the USB Memory

port.

* Audio data can’t be saved in the piano’s internal memory.

* Never turn o the power or disconnect a USB ash drive or the

power cord while the USB ash drive access indicator is blinking.

2. Select the tone that you want to play.

3. Hold down the [7] button and turn the [ ] knob to

select “Audio.”

MEMO

You can also specify this via the Function mode “Recording Mode”

setting (p. 25).

4. Press the [t] button.

The [t] button lights, the [s] button blinks, and the piano

enters record-standby mode.

If you decide to cancel recording, press the [t] button once again.

5. You can sound the metronome if you like.

Starting/stopping recording

6. Press the [s] button.

Recording starts, and the [t] button and [s] button are lit. The

performance is saved automatically.

NOTE

Never turn o the power or disconnect the USB ash drive during

recording.

7. To stop recording, press the [s] button once

again.

Recording stops.

MEMO

5You can delete the song that you recorded (p. 13).

5You can rename the song that you recorded (p. 13).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Roland LX705 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Roland LX705

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info