Bedienungsanleitung Roland LX708 (Seite 13 von 38) (Englisch)

755953

Zoom out

Zoom in

Vorherige Seite

1/38

Nächste Seite

°Recording Your Performance

Recording Your Keyboard Performance

You can record your own keyboard performance, and then play back

to check it.

Getting Ready to Record

1. Select the tone that you want to play.

2. You can sound the metronome if you like.

Set the metronome’s tempo and time signature. The metronome

setting is stored in the song, and you can use the same settings

during playback.

3. Press the [t] button.

The [t] button lights, the [s] button blinks, and the piano

enters record-standby mode.

If you decide to cancel recording, press the [t] button once again.

Starting/Stopping Recording

4. Press the [s] button.

After a one-measure count, recording starts, and the [7]

button and [s] button are both lit. The performance is saved

automatically.

MEMO

You can also start recording by playing the keyboard instead of

pressing the [s] button. In this case, a count is not sounded.

5. To stop recording, press the [s] button once

again.

Recording stops.

Listening to the Recorded Performance

6. Press the [s] button.

After you record, the newly recorded song is selected.

The recorded song starts playing back.

Deleting a Saved Song

You can delete a song that you saved.

MEMO

5You can also delete a recorded song by holding down the [7]

button and pressing the [ ] button.

5If you want to delete all songs that have been saved to internal

memory, initialize the memory (“Initializing the Memory

(Format Media)” (p. 23)).

1. Press the [ ] button.

The [ ] button is lit, and the piano is in function mode.

2. Turn the [ ] knob to access the “Delete Song”

screen.

3. Press the [ ] knob to conrm.

The Delete Song screen appears.

4. Turn the [ ] knob to select the media that contains

the song you want to delete, and press the [ ] knob

to conrm.

5. Turn the [ ] knob to select the song that you want

to delete, and press the [ ] knob to conrm.

A conrmation message appears.

If you decide to cancel, press the [ ] button.

6. Turn the [ ] knob to select “Yes,” and press the [ ]

knob to conrm.

The deletion is executed.

Managing songs you recorded

Operation

Renaming

a recorded

song

You can rename a saved song.

1. Press the [ ] button.

The [ ] button is lit, and the piano is in function mode.

2. Turn the [ ] knob to access the “Rename Song” screen,

and press the [ ] knob to conrm.

3. Turn the [ ] knob to select the media that contains the

song you want to rename, and press the [ ] knob to

conrm.

4. Turn the [ ] knob to select the song that you want to

rename, and press the [ ] knob to conrm.

5. Rename the song.

Select the character which

you want to change Turn the [ ] knob

Change the character

Press the [ ] knob (conrm)

Turn the [ ] knob (change the character)

Press the [ ] knob (back)

Insert one character Press the [s] button

Delete one character Press the [7] button

6. Turn the [ ] knob to select the ( at the right edge of

the screen, and then press the [ ] knob to conrm.

A conrmation message appears.

7. Turn the [ ] knob to select “Yes,” and press the [ ] knob

to conrm.

The song is renamed.

* Never turn o the power or disconnect the USB ash drive

while the screen indicates “Executing...”

8. Press the [ ] button.

You exit function mode.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Roland LX708 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Roland LX708

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info