Bedienungsanleitung Roland TR-8S - RHYTHM PERFORMER (Seite 13 von 24) (Englisch)

674604

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

INST-PLAY (Performing)

You can use pads [1] (BD)–[11] (RC) to perform in real time.

Your performance does not modify the pattern.

1. Press the [INST PLAY] button.

2. Perform using pads [1] (BD)–[11] (RC).

Playing Sub Steps

Here’s how to play sub steps.

This lets you play duplets, triplets, and quadruplets.

1. Press the [SUB] button.

2. Press the pad [1]–[16] that will play sub steps.

MEMO

By holding down the [SUB] button and turning the [VALUE]

knob you can choose from 1/2, 1/3, or 1/4 as the number of

step divisions.

You can also play a sub step by holding down the [SUB] button

and pressing a pad [1]–[16].

Performing a Flam

Here’s how to perform a flam on an instrument’s tone.

1. Hold down the [SHIFT] button and press the [SUB]

button to set SUB STEP to FLAM.

2. Press a pad [1] (BD)–[11] (RC).

This lets you perform a flam on the instrument’s tone.

Performing Weak Beats (WEAK BEATS)

1. While holding down the [SHIFT] button, press a

pad [1] (BD)–[11] (RC).

This lets you perform weak beats.

Performing Alternate Sounds (ALT INST)

For sounds whose name includes a “/” character, such as 707Bass1/2,

you can perform alternate sounds.

1. While holding down an instrument select button

[BD]–[RC], press a pad [1] (BD)–[11] (RC).

Performing a Roll (ROLL)

Here’s how to perform a roll on an instrument’s tone.

1. While holding down a pad [12]–[13], press a pad

[1]–[11].

This lets you perform a roll on the instrument’s tone.

Alternate method

1. While holding down the [INST PLAY] button, press

a pad [12]–[13].

Pad [12]–[13] is lit.

2. Press a pad [1]–[11].

This lets you perform a roll on the instrument’s tone.

3. To stop playing the roll, press the pad [12]–[13]

once again.

Roll speed

Pad Explanation

Pad [12] Sixteenth note

Pad [13] Thirty-second note

Pad [12] + [13] Sixty-fourth note

Editing the Pattern Settings (Pattern Setting)

Here’s how to specify the kit and tempo that are used by a pattern.

1. Hold down the [SHIFT] button and press the [PTN

SELECT] button.

The PTN SETTING screen appears.

2. Select a parameter.

2-1. Use the [VALUE] knob to select a parameter.

2-2. Press the [ENTER] button.

3. Modify values.

3-1. Use the [VALUE] knob to edit the parameter value.

3-2. Press the [ENTER] button.

Return to the parameter selection (step 2).

4. Press the [PTN SELECT] button.

You exit the PTN SETTING screen.

PTN SETTING parameter

Parameter Explanation

KIT:SW

Turn this on if you want to use the kit that’s

selected by the “KIT:Number” parameter.

KIT:Number Selects the kit used by the pattern.

Tempo Specifies the tempo of the pattern.

Scale Selects the scale.

Shuffle Specifies the amount of shuffle (bounce).

Flam Spacing Specifies the flam spacing.

ScatterType Selects the type of scatter.

ScatterDepth Adjusts the depth of scatter.

NAME Specifies the name of the pattern.

For details, refer to “Reference Manual” (PDF).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Roland TR-8S - RHYTHM PERFORMER Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info