708899

Roland TR8 - 7X7 Anleitung

1
Zoom out
Zoom in
Vorherige Seite
1/1
Nächste Seite
7X7-TR8 Drum Machine Expansion Operation Guide
© 2014 Roland Corporation
INST-REC (Realtime Recording)
In this method of recording, you create a pattern by
recording your performance on the pads (
14
) in real time.
This will modify the pattern that is selected.
1.
Press the [INST REC] button (
3
).
2.
Press the [START/STOP] button (
6
) to start
recording.
3.
Perform on the pads (
14
).
* Operations in the INST edit section (
11
) are not
recorded.
Adding accents to the performance
1.
Hold down the ACCENT [STEP] button (
7
) and use
the pads (
14
) to specify the steps.
Playing alternate sounds or weak beats
The following sounds allow you to play alternate sounds.
For the other sounds, you can specify weak beats.
707 BD1/2, 707 SD1/2,
707 RS/Cowbell, 707 HC/Tambourine,
727 H/L Bongo, 727 Mute/Open H Conga,
727 H/L Agogo, 727 Cabasa/Maracas
1.
Hold down the REVERB [STEP] button (
8
) and play
a pad (
14
).
Alternate sounds
Although one sound is assigned to each pad, specic
sounds (tones) such as the 707 BD and 707 SD have a
second sound (alternate sound) assigned as well.
The normal sound and alternate sound are played
alternately.
Playing a am
1.
Hold down the DELAY [STEP] button (
9
) and play a
pad (
14
).
Deleting a recorded instrument from the
pattern
Function Operation
Deleting a
specic region
During playback, hold down the
[CLEAR] button (
2
); the instrument
that’s selected by the INST select
buttons (
12
) is deleted from the
region of the pattern that plays while
you hold down the [CLEAR] button.
Deleting all
notes
Hold down the INST select button (
12
) of the instrument that you want to
delete, and press the [CLEAR] (
2
)
button.
Playing/Selecting/Controlling a Pattern
Playing a pattern
1.
Press the [START/STOP] button (
6
).
2.
Use scatter (
15
) or INST edit (
11
) to modify the
sound.
Selecting a pattern
1.
Press the [PTN SELECT] button (
3
).
2.
Use the pads (
14
) to select a pattern.
The selected pad blinks. It remains lit during
playback.
If you select the next pattern during playback, the
pad blinks.
You can have a range selection by pushing two
pads simultaneously. The selected patterns play
sequentially.
3.
Use the variation buttons (
5
) to select A or B.
If you make both buttons [A] and [B] light, A and
then B are played successively.
Generating a random pattern
You can automatically generate a random pattern.
This modies the selected pattern.
1.
Hold down the [PTN SELECT] button (
3
) and
press the SCATTER [ON] button (
15
).
2.
To save, press the [TR-REC] button (blinks).
Copying a pattern
1.
Press the [PTN SELECT] button (
3
).
* If a pattern is playing, stop it.
2.
Hold down the [PTN SELECT] button (
3
) and use
the pads (
14
) to specify the pattern that you want
to copy.
3.
Press the pad to which you want to paste the
pattern.
Copying a pattern for an individual
instrument
1.
Switch patterns by pressing the pad for the
pattern that you want to copy.
* If a pattern is playing, stop it.
2.
Hold down the [PTN SELECT] button (
3
) and
press the INST select button(s) (
12
) of the
instrument(s) that you want to copy. (Multiple
selections are allowed.)
3.
When you’ve specied the instrument(s), press the
[PTN SELECT] button (
3
).
4.
Press the pad (
14
) to which you want to paste the
pattern.
Deleting a pattern
1.
Press the [PTN SELECT] button (
3
).
2.
Hold down the [CLEAR] button (
2
) and use the
pads (
14
) to specify the pattern that you want to
delete.
Locking (not editable) a pattern
1.
Hold down the [PTN SELECT] button (
3
) and turn
the [TEMPO] knob (
17
).
The display indicates “
OFF
” (editable) or “
Loc
” (not
editable).
Changing kits
1.
Press the DRUM SELECT [KIT] button (
3
).
2.
Press a lit pad (
14
) to select a kit.
The selected pad blinks.
Changing an instrument’s sound (tone)
This modies the kit that is selected.
1.
Press the DRUM SELECT [INST] button (
3
).
2.
Use the INST select buttons (
12
) to select the
instrument whose tone you want to change.
3.
Press a lit pad (
14
) to select its tone.
The selected pad blinks.
* By pressing pad [16], you can select a combination
with the SP-404SX.
Changing an instrument’s pan
1.
Press the DRUM SELECT [INST] button (
3
).
2.
Hold down the INST select button (
12
) and turn the
[TEMPO] knob (L64–0–R63).
Changing the type of reverb/delay/side
chain
1.
Press the DRUM SELECT [INST] button (
3
).
2.
Press the [STEP] button (
8 9 10
) and use the pads
(
14
) to change the type of delay, reverb, or side
chain.
Turning each instrument’s reverb/delay
on/o
1.
Press the DRUM SELECT [KIT] button (
3
).
2.
Hold down the [STEP] button (
8 9
) and use the
INST select buttons (
12
) to turn the setting on/o.
Changing an instrument’s gain
1.
Press the DRUM SELECT [KIT] button (
3
).
2.
Hold down the INST select button (
12
) of the
instrument that you want to adjust, and turn the
[TEMPO] knob (
17
).
Copying a kit
1.
Press the DRUM SELECT [KIT] button (
3
).
2.
Press a pad (
14
) to select the kit that you want to
change.
3.
While holding down the [KIT] button (
3
), turn the
[TEMPO] knob (
17
) to select the copy-source kit.
* As the copy-source, you can also select an original kit
(606/707/727/808/909).
4.
Press the blinking pad (
14
) to execute the copy.
* Before executing the copy operation, you can exit
without copying by selecting “---” as the copy-source
or by pressing a dierent pad that is lit.
Pattern 1–16
A B
Kit 1–16
Inst x11
BASS
DRUM
A pattern plays the inst
of the kit.
Changing Kits/Instruments
Added instruments
TR-707/727 sounds (tones) and original sounds based on the TR-808 HC circuit have been added.
The color that’s displayed when you change an instrument’s sound (tone) is pink for TR-808, yellow for TR-909, orange for
TR-707, blue for TR-727, and white for TR-606.
INST 1 2 3 4 5 6 7 8 9
BD 808 BD 909 BD
808 BD Long
Decay
707 BD1/2
727 H/L
Bongo
909
AttackBD
606 BD --- ---
SD 808 SD 909 SD 707 SD1/2
727 Mute/
Open H
Conga
909 AttackSD 606 SD --- --- ---
LT 808 LT 909 LT 808 L Conga 707 LT 727 L Conga 707 BD1 707 BD2
808
NoiseTom L
606 Floor
Tom
MT 808 MT 909 MT
808 M
Conga
707 MT
727 H
Timbale
727 L Bongo
727 Open H
Conga
808
NoiseTom M
606 LT
HT 808 HT 909 HT 808 H Conga 707 HT 727 L Timbale
727 H
Bongo
727 Mute H
Conga
808
NoiseTom H
606 HT
RS 808 RS 909 RS 808 Claves
707 RS/
Cowbell
727 H/L
Agogo
--- --- --- ---
HC 808 HC 909 HC 808 Maracas
707 HC/
Tambourine
727 Cabasa/
Maracas
808
FingerSnap
808
NoiseClap
--- ---
CH 808 CH 909 CH 707 CH
727
ShortWhistle
606 CH --- --- --- ---
OH 808 OH 909 OH 707 OH
727
LongWhistle
606 OH --- --- --- ---
CC 808 CC 909 CC 707 CC 727 Quijada
727
ShortWhistle
606 CY --- --- ---
RC 808 Cowbell 909 RC 707 RC
727
StarChime
727
LongWhistle
808
FingerSnap
808
NoiseClap
707
Tambourine
---
TR-REC (Step Recording)
In this method of recording, you create a pattern by specifying the steps at which each instrument will sound.
This will modify the pattern that is selected. You can even play back the pattern while you’re creating it.
1.
Press the [TR-REC] button (
3
).
2.
Use the variation buttons to select either A or B.
* If A and B are playing consecutively, you can hold down
[A] and press [B] to select A, or hold down [B] and press [A]
to select B.
* By holding down the [TR-REC] button and pressing [A]
or [B], you can edit the pattern of the specied variation
regardless of the pattern that’s currently playing.
3.
Use the [SCALE] button (
13
) to specify the scale.
4.
Press one of the INST select buttons (
12
) to select the
instrument that you want to record.
5.
Use the pads (
14
) to specify the steps at which you
want the selected instrument to sound.
6.
Repeat steps 3–4.
Specifying the length of the pattern (LAST
STEP)
Here’s how to specify the number of steps that the pattern
will contain.
1.
Hold down the [LAST STEP] button (
4
) and press a
pad (
14
) to specify the last step.
* You can’t specify LAST STEP if multiple patterns are
selected.
Specifying accents
1.
Press the [STEP] button (
7
).
2.
Press the pads (
14
) for each step at which you want to
add an accent.
3.
Use the [LEVEL] knob (
7
) to adjust the volume of the
accent.
Applying reverb or delay
1.
Press the [STEP] button (
8 9
).
2.
Use the pads (
14
) to specify the steps at which you
want to apply reverb or delay.
3.
Use the knobs such as [LEVEL] and [TIME] (
8 9
) to
adjust the parameters.
Deleting a recorded instrument from the
pattern
Refer to “INST-REC (Realtime Recording)”
Playing alternate sounds or weak beats
The following sounds allow you to play alternate sounds. For
the other sounds, you can specify weak beats.
707 BD1/2, 707 SD1/2,
707 RS/Cowbell, 707 HC/Tambourine,
727 H/L Bongo, 727 Mute/Open H Conga,
727 H/L Agogo, 727 Cabasa/Maracas
1.
Hold down one of the INST select buttons (
12
) and
press the appropriate pad (
14
).
The pad lights dimly.
Specifying weak accents
1.
Press the ACCENT [STEP] button (
7
).
2.
For each step at which you want to specify a weak
accent, hold down the ACCENT [STEP] button (
7
) and
press the appropriate pad.
3.
Use the ACCENT [LEVEL] knob (
7
) to specify the
volume of the weak accent.
* You can specify either an accent or a weak accent, not
both.
* The volume of the accent and the volume of the weak
accent change in tandem.
Specifying a am
1.
Hold down the [TR-REC] button (
3
) and press a pad
to specify a am.
The pad is lit purple.
Specifying the am spacing
You can choose the am spacing in a range of eight steps.
1.
Hold down the [TR-REC] button (
3
) and use the
[TEMPO] knob (
17
) to specify the am spacing.
* If you specify “0,” there will be no am eect.
MEMO
In this operation guide, functions added by installing the TR-8 update (ver. 1.10–1.60) and
7X7-TR8 Drum Machine Expansion are printed in red.
1
[VOLUME] knob
Adjusts the output volume of the MIX OUT jacks and the PHONES jack.
* This does not aect the volume of the ASSIGNABLE OUT jacks.
2
[CLEAR] button
Erases the recorded content for an individual instrument, or deletes a pattern.
3
Mode buttons
Controller Explanation
[TR-REC] button Step-records a pattern.
Refer to “TR-REC (Step Recording)”
[PTN SELECT] button Select a pattern.
Refer to “Playing/Selecting/Controlling a Pattern”
[INST PLAY] button
Lets you use the pads (
14
) to perform in real time.
You can perform even while a pattern is playing.
If you hold down the [TR-REC] button and press the [INST PLAY] button, step loop mode
is selected.
[INST REC] button
Lets you realtime-record a pattern.
Refer to “INST-REC (Realtime Recording)”
DRUM
SELECT
[KIT] button Select a kit.
Refer to “Changing Kits/Instruments”
[INST] button
Selects the sound (tone) for an instrument.
Refer to “Changing Kits/Instruments”
4
[LAST STEP] button
Species the length of the pattern.
Refer to “TR-REC (Step Recording)”
5
Variation buttons [A][B]
Switches between variations (A/B) of a pattern.
Refer to “Playing/Selecting/Controlling a Pattern”
6
[START/STOP] button
Plays/stops the pattern.
* While a pattern is playing, you can hold down the [TAP] button and press the [START/STOP] button to move to the
beginning of the pattern.
7
ACCENT section
Adds an accent to the specied step.
Refer to “TR-REC (Step Recording)”
8
REVERB section/
9
DELAY section
Let you edit the parameters for reverb and delay.
Controller Explanation
[LEVEL] knob Volume of the reverb/delay
[TIME] knob Length of the reverb/delay
[GATE] knob Timing at which the reverb is cut o (only for reverb)
[FEEDBACK] knob Delay repetitions (only for delay)
[STEP] button Lets you use the pads (
14
) to specify the step to which reverb or delay will be applied.
10
EXTERNAL IN section
Here you can adjust the sound that’s input to the EXTERNAL IN jacks.
Controller Explanation
[LEVEL] knob Volume
[SIDE CHAIN] knob
Adjusts (“ducks”) the volume of the audio input according to the pattern being played by
the TR-8 (side chain). Turning the knob toward the right produces a greater eect.
[STEP] button
Lets you use the pads (
14
) to specify the steps at which side chaining will adjust the
volume.
11
INST edit section
Here you can adjust the tonal character of the instrument.
What is an “INST”?
The TR-8 lets you use 11 dierent INST (instruments; BASS DRUM–RIDE CYMBAL) in a pattern. You can assign a desired
sound (tone) to each instrument.
Controller Explanation
[TUNE] knob Tuning (pitch)
[DECAY] knob Length of decay
[ATTACK] knob Strength of the attack (only for BASS DRUM)
[SNAPPY] knob Volume of the snare (stretched wires) (only for SNARE DRUM)
[COMP] knob Amount of compressor eect (only for BASS DRUM and SNARE DRUM)
[LEVEL] fader Volume
* For some tones, there might not be an eect.
12
INST select button
Mode Explanation
TR-REC Selects the instrument for TR-REC.
Refer to “TR-REC (Step Recording)”
DRUM SELECT-INST
Selects the instrument whose tone will be changed.
Refer to “Changing Kits/Instruments”
13
SCALE section
Switches the scale of steps during TR-REC.
Button/LED Explanation
[SCALE] button Choose one of the following four to specify the note value of each step.
8th note triplet (
) Three steps will be one beat.
16th note triplet (
) Six steps will be one beat.
16th note (
) Four steps will be one beat.
32nd note (
) Eight steps will be one beat.
14
Pad [1]–[11](INST)/ Pad [12]–[15](ROLL)/ Pad [16](MUTE)
Mode Explanation
TR-REC For each step, specify whether the instrument will sound.
PTN SELECT Select a pattern 1–16.
INST PLAY
• Pads [1]–[11](INST) play instruments.
• If you hold down [12]–[15](ROLL) and press [1]–[11], a roll is played on that instrument;
you can press two or more of the [12]–[15] pads to change the roll variation.
If you hold down the [INST PLAY] button and press the [12]–[15] and [1]–[11] pads,
the sound will be held so that it continues playing even after you release your nger.
To cancel Hold, press the selected pad without pressing [INST PLAY].
• If you press [16](MUTE) and then press the instrument pad or INST select button, that
sound is muted.
INST REC During realtime recording, the pads record the corresponding instrument.
DRUM SELECT
KIT Select kits 1–16.
INST Select a tone for the instrument.
15
SCATTER section
Controller Explanation
[SCATTER] knob Selects the scatter type.
[DEPTH] button If this is on, the [SCATTER] knob adjusts the scatter depth.
[ON] button Enables the scatter function.
* The scatter eect will not apply to the rst cycle of the loop; the eect will apply to the second and subsequent cycles
of the loop.
* By holding down the [DEPTH] button and pressing the [ON] button, you can apply scatter to just the cycle that is
currently playing.
16
Display/
17
TEMPO section
The current tempo is shown in the display (
16
).
Controller Explanation
[TEMPO] knob Adjusts the tempo.
[SHUFFLE] knob Adjusts the amount of shue (bounce).
[FINE] knob Makes ne adjustments to the tempo.
[TAP] button To set the tempo, tap this button several times at the desired interval.
Panel Descriptions
1
11
2
12
3
13
4
5
6
7 8 9 10
17
16
15
14
Restoring the Factory Settings (Factory Reset)
Here’s how to return the TR-8 to its factory-set state.
1.
While holding down the [CLEAR] button, turn on the power.
The display indicates “
rSt
” and the [START/STOP] button blinks. If you decide to cancel the factory reset, turn o the
power.
2.
Press the
[START/STOP]
button to execute the factory reset.
3.
When the display indicates “
CNP
,” turn the TR-8’s power o, then on again.
System Settings
1.
While holding down the [PTN SELECT] button, turn on the power.
The [START/STOP] button blinks. If you decide not to make settings, turn o the power.
2.
Use the [TEMPO] knob and the pads to change the settings.
Parameter Controller Explanation
MIDI channel
[TEMPO]
knob
OFF
,
C1
–
C16
Species the MIDI transmit/receive channel.
The display indicates the channel (default:
C10
).
ONn
(OMNI)
MIDI messages of all channels are received.
The MIDI transmit channel will be 10.
MIDI
clock source
[1]
Lit (AUTO)
If MIDI clock is being input to the MIDI IN connector or the USB port, the TR-8’s
tempo will automatically synchronize to MIDI clock (default).
If MIDI clock is being simultaneously input from the MIDI IN connector and
from the USB port, the USB port takes priority.
Unlit (INTERNAL)
The TR-8 operates at the tempo specied on the unit itself. Choose the
“INTERNAL” setting if you don’t want to synchronize to an external device.
MIDI through [2]
Lit (ON)
Species whether data received from the MIDI IN connector will be
retransmitted from the MIDI OUT connector (ON: default) or will not be
retransmitted (OFF).
Unlit (OFF)
BOOST mode [3]
Lit (ON)
Boosts the output level of the MIX OUT jacks and the ASSIGNABLE OUT jacks
(default: ON).
Unlit (OFF)
EXTERNAL IN
select
[4]
Lit (STEREO)
Species whether the audio input from the EXTERNAL IN jacks will be stereo
(default setting) or mono x 2.
Unlit (MONO)
SCATTER [ON]
button
[5]
Lit (ON) Enabled only while you hold down the button.
Unlit (OFF)
Alternates between enabled/disabled each time you press the button
(default setting).
MIDI realtime
message
reception
[6]
Lit (ON) Only MIDI clock is received.
Unlit (OFF) MIDI clock and START/STOP are received (default setting).
Pattern
sequencer’s
operating mode
[7]
Lit (ON) The pattern sequencer operates with precise timing.
Unlit (OFF)
The pattern sequencer operates with timing that models the TR-808 (Default).
HIHAT link [8]
Lit (ON)
Use the CH [TUNE] knob to simultaneously adjust the tuning of CH and OH.
The CH [LEVEL] fader simultaneously adjusts the volume of CH and OH.
The OH [TUNE] knob adjusts the master tuning of cymbal-type sounds (TR-
606/TR-808 sounds only).
Unlit (OFF)
The CH/OH tuning and volume are adjusted by each controller (default
setting).
SCALE
operations
[SCALE]
Lit (ON) Hold down the [SCALE] button and use the [TEMPO] knob to select the scale.
Unlit (OFF) The scale switches each time you press the [SCALE] button (default setting).
ASSIGNABLE
OUT A
Hold down variation [A]
If the INST select button or the EXTERNAL IN section’s [STEP] button is lit, that
instrument is output to ASSIGNABLE OUT A.
ASSIGNABLE
OUT B
Hold down variation [B]
If the INST select button or the EXTERNAL IN section’s [STEP] button is lit, that
instrument is output to ASSIGNABLE OUT B
Screen-saver
Hold down [TAP] and turn the
[TEMPO] knob
Species the time until the screen saver is shown. If this is
OFF
, the screen
saver is not shown (default: 5 min).
PROGRAMMING
mode
[TR-REC]
Lit (PAD)
Each time you press the pad, the setting is switched in the order of Strong ->
Weak -> O.
Unlit (INST)
By holding down the INST select button and pressing a pad, you can enter a
weak note (default value).
EFFECT mode [KIT]
Lit (KIT) The eect type is saved in the kit.
Unlit (SYSTEM) All kits use the same eect type (default value).
3.
Press the [START/STOP] button to save the settings.
The settings are saved, and the TR-8 restarts.
To avoid disturbing others nearby, try to keep the unit’s volume at reasonable levels.
In the interest of product improvement, the specications and/or contents of this package are subject to change without prior
notice.
04

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Roland TR8 - 7X7 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Roland TR8 - 7X7

Roland TR8 - 7X7 Installationsanweisung - Englisch - 2 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info