Bedienungsanleitung Roland V-Piano (Seite 14 von 116) (Englisch)

710675

Zoom out

Zoom in

Vorherige Seite

1/116

Nächste Seite

Panel descriptions

16.

[POWER] Switch

Turns the power on/off (p.22).

17.

AC Inlet

Connect the included power cord here (p.17).

18.

USB FOR UPDATE Connector

This is used when updating the V-Piano’s internal operating

program.

Do not connect anything to this connector during normal use.

19.

DIGITAL OUT (COAXIAL) Connector

This is a coaxial type digital output jack. This will digitally output the

same audio as is output from the OUTPUT A jacks.

It complies with the S/PDIF format, and outputs a digital audio

signal (stereo).

* The [VOLUME] Knob will not adjust the volume of this connector.

Use the controls of your input device to adjust the volume.

* S/PDIF is a digital interface format that is used by consumer digital

audio equipment.

20.

USB MIDI Connector

When you want to use the included editor, use a USB cable to

connect this connector to your computer (p.58).

21.

[DISPLAY CONTRAST] Knob

Adjusts the contrast of the display (p.23).

22.

PIANO PEDAL Connector

Connect the included piano pedal here (p.20).

23.

DAMPER Connector / FC1 Connector / FC2 Connector

Connect separately sold pedals or switches here.

A variety of functions can be assigned to pedals connected to the

FC1 connector and FC2 connector (p.84).

24.

MIDI Connectors: IN, OUT/V-LINK, THRU

Connect these to external MIDI devices to transmit or receive MIDI

messages.

25.

INPUT Jacks: L/MONO, R

These are audio signal input jacks. You can connect an external

audio playback device here, and output its sound mixed with the

sound of the V-Piano.

* You cannot adjust the input level of these jacks, nor the balance

between these inputs and the V-Piano’s output.

26.

OUTPUT B Connectors: L/3, R/4

These are audio signal output jacks. The signal to be output from

these jacks can be selected from a menu (p.81).

You can use these jacks in conjunction with the OUTPUT A jacks to

output the V-Piano’s sound as four-channel output.

The phone jack and XLR connectors output the same signal.

27.

OUTPUT A Connectors: L/1, R/2

These are the main audio signal output jacks.

The phone jacks and XLR connectors output the same signal.

Rear panel

About the XLR OUTPUT connectors

This instrument is equipped with balanced (XLR) type jacks.

These jacks are wired as shown below. Make connections after

first checking the wiring diagrams of other equipment you

intend to connect.

fig.XLRTRSJack.eps

About the phone (1/4”) OUTPUT connectors

If you connect a phone plug to only the L/1 (and L/3) phone

jacks, they will output a mono signal that mixes-in the R/2 (and

R/4) signals, allowing you to use these as mono outputs.

* The XLR connectors will output a stereo signal.

* The V-Piano is designed to be used with stereo output. The

sound quality and tonal character will be affected if you use

monaural output.

V-Piano_e.book 14 ページ２００９年１月２８日　水曜日　午前９時１０分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Roland V-Piano Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Roland V-Piano

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info