Bedienungsanleitung Roland V-Piano (Seite 84 von 116) (Englisch)

710675

Zoom out

Zoom in

Vorherige Seite

1/116

Nächste Seite

Detailed settings for various functions (Utility screen)

fig.UtilPedal.eps

Here you can make settings for the piano pedals and for the pedals connected to the PEDAL FC1 jack / FC2 jack.

You cannot change the settings for the right piano pedal or the pedal connected to the DAMPER jack. These pedals will always

operate as damper pedals.

Pedal settings (4. Pedal)

Parameter

Description Value Default Value

Piano Pedal Mode

Piano pedal settings can be saved within each setup (p. 59).

When you switch setups, this setting specifies whether the piano

pedal settings will change to the settings saved in that setup

(SETUP) or will not change (SYSTEM).

SETUP, SYSTEM SETUP

Center Pedal Assign

Specifies the function that will be controlled by the center piano

pedal.

Refer to “Functions that

can be assigned to a

pedal” (p. 85).

SOSTENUTO

Center Pedal Min Specifies the value sent when the center piano pedal is released.

(Range of values for the

assigned function)

(Minimum value for the

assigned function)

Center Pedal Max

Specifies the value sent when the center piano pedal is fully

depressed.

(Maximum value for the

assigned function)

Left Pedal Assign

Specifies the function that will be controlled by the left piano

pedal.

Refer to “Functions that

can be assigned to a

pedal” (p. 85).

SOFT

Left Pedal Min Specifies the value sent when the left piano pedal is released.

(Range of values for the

assigned function)

(Minimum value for the

assigned function)

Left Pedal Max

Specifies the value sent when the left piano pedal is fully

depressed.

(Maximum value for the

assigned function)

Foot Controllers Mode

Settings for the pedals connected to the FC1 jack and FC2 jack

are saved within each setup (p. 59). When you switch setups, this

setting specifies whether these pedal settings will change to the

settings saved in that setup (SETUP) or will not change (SYSTEM).

SETUP, SYSTEM SETUP

FC2 Assign

Specifies the function that will be controlled by the pedal

connected to the FC2 jack.

Refer to “Functions that

can be assigned to a

pedal” (p. 85).

SOSTENUTO

FC2 Min

Specifies the value sent when the pedal connected to the FC2

jack is released.

(Range of values for the

assigned function)

(Minimum value for the

assigned function)

FC2 Max

Specifies the value sent when the pedal connected to the FC2

jack is fully depressed.

(Maximum value for the

assigned function)

FC1 Assign

Specifies the function that will be controlled by the pedal

connected to the FC1 jack.

Refer to “Functions that

can be assigned to a

pedal” (p. 85).

SOFT

FC1 Min

Specifies the value sent when the pedal connected to the FC1

jack is released.

(Range of values for the

assigned function)

(Minimum value for the

assigned function)

FC1 Max

Specifies the value sent when the pedal connected to the FC1

jack is fully depressed.

(Maximum value for the

assigned function)

V-Piano_e.book 84 ページ２００９年１月２８日　水曜日　午前９時１０分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Roland V-Piano Seite 84

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Roland V-Piano

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info