Bedienungsanleitung Roland V-Piano (Seite 102 von 116) (Englisch)

710675

102

Zoom out

Zoom in

Vorherige Seite

1/116

Nächste Seite

102

Troubleshooting

If the V-Piano does not function in the way you expect, first check the following points. If this does not resolve the problem, consult

your dealer or a nearby Roland Service Station.

If certain messages appear in the display during operation, please refer to “Error Messages” (p. 104).

Problem

Check/Solution Page

Power not coming on

Is the V-Piano’s power cord properly plugged into a power source as well as connected to the V-Piano? p. 17

Buttons don’t work

Could panel lock be active?

• Disengage the panel lock.

p. 42

No sound

Is the power for connected amps and speakers turned on? p. 22

Is the volume turned all the way down? p. 22

Are all connections properly made?

• When using the V-Piano as a stand-alone instrument, be sure to connect with audio cables or use

headphones.

p. 18

Are sounds audible with headphones connected?

• If sounds are audible through headphones, it may indicate that there is a short in an audio cable or some

sort of amp or mixer problem. Check the cables and equipment once again.

p. 18

Is the Local Switch set to OFF?

• Set the Local Switch to ON.

p. 81

Could the volume have been lowered by pedal operations or by MIDI messages (volume messages and expression

messages) received from an external MIDI device or from song data?

• Raise the Master Volume.

• Try switching Tones.

p. 80

p. 34

No sound from the

connected MIDI device

Does the V-Piano’s MIDI transmit channel match the MIDI receive channel of the connected MIDI device?

• Set the MIDI transmit channel.

p. 86

Is V-LINK switched on?

• Set the Local ON/OFF to ON. Sounds are played with keyboard even when V-LINK is switched on.

p. 96

Tones are altered

Did you call up a Setup?

• When a Setup is called up, the current Tone and other settings are disabled, and the selected Setup goes

into effect. Resave required settings to a Setup.

–

If you’re using a monaural connection, the tonal character may change depending on the Tone or the register.

• In order to enjoy the V-Piano’s sound to its fullest potential, we recommend a stereo connection.

• If you’re using a monaural connection, set Line Out Mode to MONO.

p. 81

Sound is distorted Some equalizer settings may cause the sound to distort. Try adjusting the equalizer’s Input Gain. p. 37

Pitch is odd

Depending on the Tone selected, pitches played in certain registers will be changed and played at other pitches. –

Have settings for Stretch Tune been made? p. 54

Has the V-Piano gone out of tune? Check the following settings.

• Master Tune settings

• Temperament settings

p. 80

Have you set Transpose? p. 41

Song data not played

back correctly

Are you playing back GS Format song data?

• Once the V-Piano receives a GS Reset message, it then is enabled for GS Format. This permits playback of

music files bearing the GS logo (GS music files). However, data created exclusively for the Sound Canvas

Series may not play back properly on the V-Piano.

–

Is the audio data playable?

• Make sure that the audio data can be played by the V-Piano.

p. 75

Nothing appears in the

screen

Since the V-Piano uses a liquid crystal screen, it may happen that no text or graphics appear in the screen if the

temperature is below zero degrees Celsius (32 degrees Fahrenheit).

p. 23

Vertical lines appear in

the screen/Color is

“washed out” at the

edges of the screen

These occur due to the nature of a liquid crystal display, and do not indicate a malfunction. They can be minimized

by adjusting the contrast of the screen.

p. 23

Pedal does not work, or is

“stuck”/ Pedal does not

operate correctly

Is the pedal connected correctly?

• Plug the cord firmly into the pedal connector.

p. 18

Are you using a pedal made by another manufacturer?

• Use the pedal included with the V-Piano or an optional pedal.

p. 107

Can’t read or write USB

memory successfully

Are you using (optional) Roland USB memory?

• Reliable performance cannot be guaranteed if you use non-Roland USB memory products.

–

If you are unable to read or write USB memory successfully, change the USB Memory Mode setting. p. 80

V-Piano_e.book 102 ページ２００９年１月２８日　水曜日　午前９時１０分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Roland V-Piano Seite 102

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Roland V-Piano

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info