Bedienungsanleitung Roland XV-2020 (Seite 55 von 169) (Englisch)

647722

Zoom out

Zoom in

Vorherige Seite

1/169

Nächste Seite

Creating a Patch

PATCH LFO (Applying Vibrato or Tremolo)

The LFO (Low Frequency Oscillator) can alter various Tone settings in a back-and-forth, cyclic manner.

Each Tone has two LFOs, and each can apply the desired amount of repetitive change to the Tone’s Pitch,

TVF cutoff frequency, TVA Level and TVA Pan settings. This can be used as the Matrix Control source (p.

50).

How to Use the LFO

Applying an LFO to the Tone’s Pitch settings creates vibrato, applying it to its TVF cutoff frequency creates

a wah-wah, and applying it to its TVA Level creates tremolo. When an LFO is applied to the Tone’s TVA

Pan, the sound moves back and forth, from one side to another, in the stereo field.

Depending on your settings, an LFO can also be used to cyclically exchange two Tones. For example, if

you wish to shift back and forth between Tones 1 and 2, select the same LFO settings for both, but set their

LFO TVA Depth settings to opposite polarities—set one to a + value, and the other to a - value.

* LFO Since both LFOs have the same parameters, the following explanations apply to both.

ENV TIME KF

(Pitch Envelope Time Key-

follow)

-100–+100 Use this parameter when you want the keyboard location of

notes to affect times T2–T4 of the pitch envelope. Higher val-

ues for this parameter cause more extreme changes to the T2–

T4 settings as you play further away from Middle C (C4)—at

Middle C itself, your original T2–T4 settings are in effect. Pos-

itive (+) settings cause the times to be shortened for notes

above Middle C. Negative (-) settings cause the times to be

lengthened for notes above Middle C.

ENV VEL SENS

(Pitch Envelope Velocity

Sensitivity)

-63–+63 Adjust this parameter when you want your keyboard playing

dynamics (velocity) to affect the amount of pitch enveloping.

With higher settings, there is a greater difference in the

amount of enveloping when notes are played softly or when

they’re played hard. Negative (-) settings reverse the direction

of change.

ENV T1 SENS

(Pitch Envelope Time 1

Velocity Sensitivity)

-63–+63 Use this parameter when you want keyboard playing dynam-

ics to affect T1 (Time 1) of the pitch envelope. If you want T1

to be sped up for strongly played notes, set this parameter to a

positive (+) value. If you want it to be slowed down, set this to

a negative (-) value.

ENV T4 SENS

(Pitch Envelope Time 4

Velocity Sensitivity)

-63–+63 Use this parameter when you want key release speed to affect

T4 (Time 4) of the pitch envelope. If you want T4 to be sped up

for quickly released notes, set this parameter to a positive (+)

value. If you want it to be slowed down, set this to a negative

(-) value.

ENV T1–T4

(Pitch Envelope Time1–4)

0–127 Specify the pitch envelope times. Higher settings lengthen the

time until the next pitch is reached. (For example, T2 is the

time over which the pitch changes from L1 to L2.)

ENV L0–L4

(Pitch Envelope Level 0–4)

-63–+63 Specify the pitch envelope levels. They determine how much

the pitch changes from the reference pitch (the value set with

Coarse Tune and Fine Tune) at each point. Positive (+) settings

cause the pitch to be higher than the standard pitch, and neg-

ative (-) settings cause it to be lower.

Parameter Value Description

C4C3C2C1 C5 C6 C7

+50

+100

-50

-100

Key

Time

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Roland XV-2020 Seite 55

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info