Bedienungsanleitung Roland XV-2020 (Seite 68 von 169) (Englisch)

647722

Zoom out

Zoom in

Vorherige Seite

1/169

Nächste Seite

Creating a Rhythm Set

RHYTHM CONTROL (Other Settings)

VEL SENS

(TVA level velocity sensitivity)

-63–+63 Use this setting when you want keyboard touch (velocity) to affect the Rhythm Tone

volume. Set this to a positive value to have the changes in tone volume increase the

more forcefully the keys are played; to make the Rhythm Tone play more softly as you

play harder, set this to a negative value.

PAN

(Rhythm tone pan)

L64–63R This specifies the stereo position of the Rhythm Tone. L64 places the Rhythm Tone

hard left, 0 puts it dead-center and 63R pans it hard right.

RANDOM PAN DEPTH 0–63 Use this parameter to activate random panning, note-by-note. Higher values result in

more extreme fluctuations in the Rhythm Tone’s stereo placement.

ALT. PAN DEPTH

(Alternate pan depth)

L63–63R This setting causes panning to be alternated between left and right each time a key is

pressed. Higher values result in a greater left/right width. You can select the stereo

placement of the first key using this parameter—its opposite will be used for the sec-

ond note, and so on back and forth. If you want to alternate the pan position of two

Rhythm Tones, set them to the exact opposite L and R settings.

TVA ENVELOPE

This specifies the manner in which keyboard ve-

locity will affect the times of the TVA envelope.

ENV T1 SENS

(TVA envelope time 1 velocity

sensitivity)

-63–+63 Use this parameter when you want keyboard playing dynamics (velocity) to affect T1

(Time 1) of the TVA envelope. With higher settings, the T1 value will change more sig-

nificantly depending on whether you play softly or with greater force. With positive

(+) settings, greater keyboard velocity will reduce the T1 setting. With negative (-) set-

tings, greater keyboard velocity will increase the T1 setting.

ENV T4 SENS

(TVA envelope time 4 velocity

sensitivity)

-63–+63 Use this parameter when you want key-off velocity—the speed at which you release a

key—to affect T4 (Time 4) of the TVA envelope. With higher settings, the T4 value will

change more significantly depending on whether you release the key slowly or quick-

ly. With positive (+) settings, faster key-off velocity will reduce the T4 setting. With

negative (-) settings, faster key-off velocity will increase the T4 setting.

ENV T1–T4

(TVA envelope time 1–4)

0–127 Specify the TVA envelope times. Higher settings lengthen the time until the next vol-

ume level is reached. (For example, T2 is the time over which L1 changes to L2.)

ENV L1–L3

(TVA envelope level1–3)

0–127 Specify the TVA envelope levels. These settings specify how the volume changes at

each point, relative to the standard volume.

SEND LEVEL DRY

(Dry Send Level)

Refer to p. 78.

SEND LEVEL CHO

(Tone Chorus Send Level)

SEND LEVEL REV

(Tone Reverb Send Level)

OUTPUT ASSIGN

(Tone Output Assign)

Parameter Value Description

PITCH BEND RANGE

(Rhythm tone pitch bend range)

0–48 Specifies the amount of pitch change that will occur when you move the Pitch

Bend Lever.

MUTE GROUP OFF, 1–31 The Mute Group function allows you to designate two or more Rhythm Tones

that are not allowed to sound simultaneously. For example, in a real-world

acoustic drum set, an open hi-hat and a closed hi-hat sound will never occur

simultaneously, since they’re produced by the same instrument. To simulate

this behavior on the XV-2020, you can set the open and closed hi-hat Rhythm

Tones to the same Mute Group. You can have up to 31 Mute Groups per

Rhythm Set. If you do not want a Rhythm Tone to use a Mute Group, turn the

feature off.

ASSIGN TYPE

(Assign type)

MULTI, SINGLE This setting determines whether a Rhythm Tone note that is playing is

stopped when the same note is played again (SINGLE), or whether it will con-

tinue to play, layered with the new note.

Parameter Value Description

T1 T2 T3 T4

Level

key is pressed key is released

Time

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Roland XV-2020 Seite 68

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info