Bedienungsanleitung Roland XV5050 (Seite 11 von 184) (Englisch)

603202

Zoom out

Zoom in

Vorherige Seite

1/184

Nächste Seite

Panel Descriptions

Front Panel

fig.FrontPanel

USB Connector

Use this for connecting a computer to the XV-5050 using a USB cable

(p. 35).

PHONES Jack

Headphones are plugged in here (p. 13).

[VOLUME] Knob (PHRASE PREVIEW)

Adjusts the volume from the A (MIX) OUTPUT jacks and PHONES

jack. The volume from the OUTPUT B jacks cannot be adjusted.

You can press the knob to listen to the XV-5050 without using any

external devices. (Phrase Preview; p. 18)

MIDI MESSAGE indicator

This will light when a MIDI message is received via MIDI connector.

USB MESSAGE indicator

This will light when a MIDI message is received via USB connector.

Display

Presents a variety of information about the operation being

performed.

[VALUE] Dial (FAVORITE LIST)

Turn this dial to change a parameter’s setting, or “value.” If you hold

down [SHIFT] as you turn [VALUE], the parameter’s value will

change by larger increments.

Press this dial in Patch/Rhythm Set mode to display a list showing

the collection of your favorite sounds. (Favorite List; p. 33)

[PATCH FINDER] Button

You can choose a Patch using the Patch Finder feature (p. 21).

[PERFORM] Button

Press this button to enter Performance mode (p. 23).

Press this button while holding down [SHIFT] to enter General MIDI

2 mode (p. 23).

[PATCH] Button

Press this to enter Patch mode (p. 23).

Press this button while holding down [SHIFT] to enter Rhythm Set

mode (p. 23).

[EXIT] Button

Press this button when you wish to return to a mode’s PLAY screen,

or to cancel an operation before executing it.

Hold [EXIT] and press [ BANK] to hear the XV-5050 demo

songs.

[ CURSOR], [CURSOR ] Buttons

Move the cursor (underline) with these.

[SHIFT] Button

Use [SHIFT] in combination with other buttons. Holding down this

button changes the functions of other buttons.

[ BANK], [BANK ] Buttons

Choose the Bank with these (p. 21).

[EDIT] Button

Provides access to relevant settings, or “parameters.”

[SYSTEM] Button

Press this to enter System mode.

This allows you to make settings that affect the entire XV-5050.

[UTILITY] Button

Press this to enter Utility mode.

This button allows you to perform operations such as saving,

copying, initializing, transferring data, write-protecting data, and

factory reset operations.

TONE SWITCH/SELECT [1]–[4] Buttons

(In Patch/Rhythm Set mode)

Switches each Tone on or off when [TONE] is dark (p. 39).

Chooses a Tone whose settings you wish to change when [TONE] is

lit (p. 39).

[ PART], [PART ] Buttons

(In Performance mode)

Chooses a Part whose settings you wish to change (p. 64).

[INFO] Button

(In Performance mode)

Press this to check the receive status of various types of MIDI

message for each Part (p. 67).

[TONE] Button (ENTER)

Switches the function of the TONE SWITCH/SELECT [1]–[4]

buttons.

• When this button is dark, [1]–[4] switches each Tone on or off.

• When this button is lit, [1]–[4] chooses a Tone whose settings you

wish to change.

Finalizes a setting value or executes an operation (ENTER).

[POWER] Switch

Turns the XV-5050’s power on and off (p. 14).

C J

XV-5050_e.book 11 ページ２００３年６月２７日　金曜日　午後３時１４分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Roland XV5050 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Roland XV5050

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info