Reverse Delay
This is a reverse delay that adds a reversed and delayed sound to the input sound. A
tap delay is connected immediately after the reverse delay.
R out
L out
L in
D1
Rev
D2D3
Feedback
R in
Rev. Delay
2-Band
EQ
2-Band
EQ
Delay
Parameter Value Explanation
Threshold 0–127 Volume at which the reverse delay will begin to be applied
Rev Delay Time (sync sw) OFF, ON Synchronize to the tempo of the DAW if this is ON.
Rev Delay Time (msec) 1–1300 [msec]
Delay time from when sound is input into the reverse delay
until the delay sound is heard
Rev Delay Time (note) Note
& “Note”
Rev Delay Feedback -98–+98 [%]
Proportion of the delay sound that is to be returned to
the input of the reverse delay (negative (-) values invert
the phase)
Rev Delay HF Damp
200, 250, 315, 400, 500,
630, 800, 1000, 1250,
1600, 2000, 2500, 3150,
4000, 5000, 6300, 8000,
BYPASS [Hz]
Frequency at which the high-frequency content of the
reverse-delayed sound will be cut (BYPASS: no cut)
Rev Delay Pan L64–63R Panning of the reverse delay sound
Rev Delay Level 0–127 Volume of the reverse delay sound
Delay 1 Time (sync sw) OFF, ON Synchronize to the tempo of the DAW if this is ON.
Delay 1 Time (msec) 1–1300 [msec]
Delay time from when sound is input into the tap delay
until the delay sound is heard
Delay 1 Time (note) Note
& “Note”
Delay 2 Time (sync sw) OFF, ON Synchronize to the tempo of the DAW if this is ON.
Delay 2 Time (msec) 1–1300 [msec]
Delay time from when sound is input into the tap delay
until the delay sound is heard
Delay 2 Time (note) Note
& “Note”
Delay 3 Time (sync sw) OFF, ON Synchronize to the tempo of the DAW if this is ON.
Delay 3 Time (msec) 1–1300 [msec]
Delay time from when sound is input into the tap delay
until the delay sound is heard
Delay 3 Time (note) Note
& “Note”
Delay 3 Feedback -98–+98 [%] Proportion of the delay sound that is to be returned to the
input of the tap delay (negative (-) values invert the phase)
Delay HF Damp
200, 250, 315, 400, 500,
630, 800, 1000, 1250,
1600, 2000, 2500, 3150,
4000, 5000, 6300, 8000,
BYPASS [Hz]
Frequency at which the hi-frequency content of the tap
delay sound will be cut (BYPASS: no cut)
Delay 1 Pan L64–63R
Panning of the tap delay sounds
Delay 2 Pan L64–63R
Delay 1 Level 0–127
Volume of the tap delay sounds
Delay 2 Level 0–127
Low Gain -15–+15 [dB] Amount of boost/cut for the low-frequency range
High Gain -15–+15 [dB] Amount of boost/cut for the high-frequency range
Balance D100: 0W–D0: 100W Volume balance between the direct sound (D) and the
delay sound (W)
Level 0–127 Output Level
