Bedienungsanleitung Rollei D 33 COM (Seite 20 von 39) (Englisch)

104175

Zoom out

Zoom in

Vorherige Seite

1/39

Nächste Seite

This is how it works: This is how it looks: This is what it‘s for:

Rollei Fototechnic GmbH, Salzdahlumer Strasse 196, D-38126 Braunschweig, Tel 0531-6800-0, Fax 0531-6800-243, eMail info@rollei.de

This is how it works: This is how it looks: This is what it‘s for:

Rollei Fototechnic GmbH, Salzdahlumer Strasse 196, D-38126 Braunschweig, Tel 0531-6800-0, Fax 0531-6800-243, eMail info@rollei.de

Automatic exposure

control

The camera automatically

controls the exposure of

your digital photos with an

equivalent sensitivity of ISO

100/21°.

Programmed AE will

automatically select shutter

speeds from 2 s to 1/500 s

and apertures of f/3.4, f/4.8,

f/7.7 and f/15 (wide-angle)

as well as f/3.6, f/4.8, f/7.7

and f/15 (telephoto).

Press the MENU button on

the camera back and use the

four-way control to select

Exposure. In the Area

submenu you may select

Full, Central or Spot using

the four-way control

(pressing the Right arrow

̈).

A blinking red lamp beside

the viewfinder eyepiece

warns against camera shake

(when the flash is off) and

recommends use of a tripod.

To lock in exposure settings,

press and hold the shutter

release in its halfway

position. This allows pinpoint

exposure control in the case

of high subject contrast.

In its default setting, the

camera averages exposure

over the entire field.

However, for certain

subjects, such as portraits

against a bright background,

you may also switch to

center-weighted metering.

Spot metering in turn is ideal

for precise metering of

important subject details.

For pinpoint metering, use

AE lock with the shutter

release depressed halfway.

Exposure compensation

Automatic exposure can be

compensated over a range

of +2.0 to –2.0.

Press the MENU button on

the camera back and use the

four-way control to select

the Exposure mode. In the

EV subprogram you then

can choose between the

following compensation

values: +2.0, +1.5, +1.0,

+0.5, -0.5, -1.0, -1.5 and

–2.0. Press the Right arrow

̈ of the four-way control

to make your selection.

Experiment with exposure

compensation to optimize

your digital images. Slight

compensation (for example

by +/- 0.5) may be useful,

above all if you wish to print

out your pictures directly, i.e.

without subsequent

manipulation by PC

image-processing software,

be it on your own printer or

through an Internet printing

service, since different

printers and printer software

interpret digital images

differently (and might print

your pictures too bright or

too dark).

Note: If you wish to avoid

flash in low light, a certain

amount of underexposure

may give you shake-free

images because the camera

will then use a faster shutter

speed. PC image-processing

software is capable of

correcting such under-

exposure.

Taking pictures Mode dial set to Camera icon Mode dial set to Camera icon Taking pictures

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Rollei D 33 COM Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info