EN-16
Setting the Date and Time
Follow the steps below to set the date display style, current date and time.
1. Rotate the mode dial to and turn your camera on by pressing the power switch.
2. [Set-up1] is displayed.
3. Use the four-way controller (T) to select [Date & Time], then press the button.
4. Press the four-way controller (WX) to
select Day, Month, Year and Time fields.
To increase a value, press the four-way
controller (S).
To decrease a value, press the
four-way controller (T).
The time is displayed in 24-hour format.
5. Press the button after all fields are set.
The date illustration shown is for the purpose of explanation and may differ from the actual
setting of your camera.
Formatting an SD Memory Card or Internal Memory
The term “Formatting” means preparing an “SD memory card” to record images; this
process is also called “initialization”. This utility formats an SD memory card or the
internal memory and erases all stored images and data.
1. Rotate the mode dial to and turn your
camera on by pressing the power switch.
[Set-up1] is displayed.
2. Use the four-way controller (T) to select
[Format], then press the button.
3. Use the four-way controller (ST) to select
[Yes], then press the button to confirm.
When you format an SD memory card, be aware that all data on the SD memory card will be
erased. Protected images are also erased.
To format the internal memory, do not insert an SD memory card into the camera. Otherwise,
you will format the SD memory card.
An SD memory card having any problem cannot be properly formatted.
