Bedienungsanleitung Rombouts RMB-10443 EOH - The perfect Espresso (Seite 9 von 16) (Englisch)

812593

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

10 - Press the required button: Small coee ( 3) or Large coee ( 4). The light on the

selected button will remain on and the other button will go out. The coee is on

its way. The coee cycle stops automatically at the end of the cycle or can be

interrupted manually by pressing the selected button again.

11 - After the coee pod has brewed, raise the handle as far as possible ( 1) while

pulling towards you, the used pod will then fall into the used pod basket ( 7).

The machine is then ready to make another coee.

PROGRAMMING

The 2 coee options (small or large) are pre-programmed by default (4 cl for a small

coee and 12 cl for a large coee). You can change these volumes as follows:

1 - Start the machine (see instructions in the above section). The white lights on

the coee buttons( 3) and ( 4) must stay ON (the machine is at the right

temperature, ready to make coee). Check that the water tank ( 6) contains

enough water to enter settings.

2 - Press and hold the coee button for the volume you wish to change for at least

5seconds. The white light on the button will then ﬂash rapidly, and the central

indicator ( 2) will light up white. The machine is now in programming mode.

3 - Raise the handle ( 1) and insert a pod.

4 - Lower the handle ( 1) and press the coee option to be programmed (the button

selected previously, which is now ﬂashing), the central light will go out and the

machine will start to pour the coee.

5 - Once the required volume of coee has been poured, press the same button

again to stop serving and save the selected volume.

6 - The white light on the programmed button will then stay ON (together with the

light on the other coee button), the programming has been saved for the button.

The machine is ready to make coee.

Note: the factory settings for coee options can be recovered as follows:

1 - Start the machine (see instructions in the above section). The white light on

the coee buttons( 3) and ( 4) must stay ON (the machine is at the right

temperature, ready to make coee).

2 - Press and hold the coee button for the volume you wish to change for at least

5 seconds. The white light on the button will then ﬂash rapidly, and the central

indicator ( 2) will light up white. The machine is now in programming mode.

3 - Press and release the other coee button: the button light will stop ﬂashing,

factory settings are re-established, the two coee button lights ( 3) and ( 4)

will come ON, and the machine is ready to serve coee.

RMB-10443-EOH-handleiding-FR-NL-DE-ENG-NO-SW-1.indb 20RMB-10443-EOH-handleiding-FR-NL-DE-ENG-NO-SW-1.indb 20 26/11/2021 14:2426/11/2021 14:24

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Rombouts RMB-10443 EOH - The perfect Espresso Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Rombouts RMB-10443 EOH - The perfect Espresso

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info