490003
6
Zoom out
Zoom in
Vorherige Seite
1/20
Nächste Seite
5
6.2.2 Manual Operation with combined top/bottom heat with meat probe
Selecting
combined
top/bottom heat
with meat probe
The function of combined top/bottom heat with meat
probe is indicated through a line symbol in both top and
bottom left-hand corner next to the H
and the meat probe
in the bottom right-hand corner. The meat probe must be
connected for this function!
Press Setting Button [°C] for changing to set the switch-off temperature
Setting the switch-
off temperature
Now you can set the switch-off temperature (core
temperature) within a range fro 10 to 99°C. The standard
setting is 80°C. The C symbol at the 4
th
digit is blinking.
Set the temperature via [ + ] / [ - ] buttons
Press Setting Button [°C] for changing to set the requested temperature
Selecting
combined
top/bottom heat
with meat probe
The function of combined top/bottom heat with meat
probe is indicated through a line symbol in both top and
bottom left-hand corner next to the H
and the meat probe
in the bottom right-hand corner. The meat probe must be
connected for this function!
Setting the
requested
temperature
Now you can set the requested temperature within a range
from 50 to 300°C. The standard value is 180°C. The
symbolised function at the 4
th
digit is blinking.
Set the temperature via [ + ] / [ - ] buttons
Press Start/Stop Button [►■] to start the function subject to the set values
Activated function
The temperature around the meat probe is indicated.
Operation is indicated by the top right-hand oven symbol
(fig. on the left shows an effective temperature of 32°C)
Function is finished/interrupted when operating
time has elapsed or by keeping the Start/Stop
Button [►■] pressed for 2 seconds.
Interruption will prompt display of current time.
6.3 Quick start with manual functions
If the Start/Stop Button [►■] is pressed right after setting the requested temperature, the
operating time setting will be skipped. The selected function will start immediately without time
limitation. If you wish to quit a manual function without time limitation, keep the Start/Stop Button
[►■] pressed for 2 seconds. Cancelling the function will prompt indication of the current time.
6.4 How to check and alter temperature/time values during operation
By pressing the Setting Button [°C], the temperature and time values set in manual function can
be checked and altered as required, even while the function is active.
To this end, select the temperature or time value to be altered via the Setting Button [°C]. While
the symbolised function or the °C symbol is blinking at the 4
th
digit, you may vary the relevant
value via Plus [+] or Minus [-].
Altered values are immediately (i.e. during the setting process) adopted. Unless a button is
pressed for a period of 12 seconds, this setting mode will be quit automatically and the function
will resume subject to the settings as altered. The Start/Stop Button [►■] need not be activated.
6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Rommelsbacher BGO1600 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info