Bedienungsanleitung Rommelsbacher BGO1600 (Seite 15 von 20) (Deutsch, Englisch)

490003

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

While the individual temperature and time values are indicated, symbol A (Auto) is glowing.

Apart from that, the readout of the display will be in line with that shown during the setting

procedure.

7.7 Pause function in Automatic Operation

Any activated function can be interrupted by briefly pressing the Start/Stop Button [►■].

This will prompt deactivation of any heating functions and interruption of any operating times

probably effective. The interruption is signalled by the symbol “A” in the upper left-hand corner of

the display blinking. Depending on the respective programme step, the current temperature

around the meat probe and the operating time effectively remaining for the respective programme

step are indicated.

The programme will keep interrupted until the Start/Stop Button [►■] is briefly re-pressed to

resume the function, or the programme function is quit by keeping the Start/Stop Button [►■]

pressed for 2 seconds.

8. Troubleshooting and error display

8.1 Meat probe is missing

If the meat probe is neither required for a function nor connected, the function will be started

nonetheless. The starting process will be accompanied by an audible signal with the “meat probe”

symbol blinking.

The meat probe is required for the following functions:

- Manual function: “combined top/bottom heat with meat probe”

- All automatic programmes

Choosing those functions, the oven will not power up until meat probe is recognised.

Fig.: Readouts indicating missing meat probe in both Manual and Automatic Operation

(“meat probe” symbol is blinking)

Connecting the meat probe will reset the alarm and set the function going.

The audible signal can be reset for 2 minutes by pressing any button once.

8.2 Excessive temperature around meat probe

When the upper sensor detects too excessive a temperature (T>230°) around the meat probe,

you will notice both an audible and a visual signal. In such a case, remove the meat probe.

Caution! Mind the danger of burns upon removal of the meat probe!

As the temperature drops, the audible signal will be reset automatically.

The audible signal can be reset for 2 minutes by pressing any button once.

8.3 Defective sensors to determine the oven temperature

When an improper value is detected by a temperature sensor (T<= 0°C or T>350°C), the

appropriate error code appears on the display (e.g. „Er01“).

In such a case, please approach our customer service by dialling (+49) 9851 / 57 58-32 and give a

description of the fault.

8.4 Overheating protection

The BGO 1600/E additionally features a thermal overheating protection facility, interrupting the

voltage supply inside the appliance when the tolerable temperature limit is exceeded. After the

appliance has cooled down, the voltage supply will be restored automatically.

At this stage, the timer will be in the switch-on mode.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Rommelsbacher BGO1600 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info