Bedienungsanleitung Rommelsbacher CT2203 (Seite 15 von 20) (Deutsch, Englisch)

490020

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

• Ifthereisnofurtherinputwithin10secondsafterswitch-on,thecontrolwillautomatically

switch back to the off mode.

Switching the control off

IDuring operating mode, the control can be switched off any time by applying the ON/OFF

sensor. This switch-off function has always priority during operation even if other sensors are

applied simultaneously or the child-proof lock is active.

MINUS-/PLUS sensors

The sensors MINUS and PLUS are for setting the desired cooking level as

well as for activating the automatic cooking system.

Switching a cooking zone on (cooking)

By quickly applying the MINUS or PLUS sensor after switch-on, the respective cooking zone will

be activated.

Setting a cooking level

When applying the PLUS sensor for the ﬁrst time, the appliance starts with setting 1. By further

applying the PLUS sensor, the level can be increased to 9.

When applying the MINUS sensor for the ﬁrst time, the appliance starts with setting 9. By

further applying the MINUS sensor, the level can be reduced to 1.

When continuously applying one of the two sensors, the indication changes in the rhythm of 0.5

seconds.

When continuously applying the PLUS sensor, the cooking level remains at the highest setting

and when continuously applying the MINUS sensor, it remains at cooking level “0” (end stop).

Only by shortly releasing the respective sensor and applying it anew, this end stop is passed.

For example, this is necessary for activating the automatic cooking system.

Automatic cooking system

Every cooking zone features an automatic cooking system: After activation of the cooking zone,

it will be heated for the period of a pre-programmed cooking time at max. power level (100 %).

This allows for an especially quick heating of your food and thus, helps to save time and energy.

The period of the automatic cooking system depends on the chosen cooking level (see chart

under point “Cooking level parameters”).

Activating the automatic cooking system

The automatic cooking system of a cooking zone is activated by selecting the

cooking level via the MINUS sensor downwards and by switching via “0” to “9” or

further down (e. g. to level “5”). Now, a point glows in the cooking level display

additionally on the right beside the ﬁgure. This point indicates that the automatic

cooking system is active for this cooking level. The point goes out as soon as the

time of the automatic cooking system has elapsed. Then, the cooking zone keeps

heating at the set level (e. g. “5”).

Quitting the automatic cooking system

The automatic cooking system can be quit any time by setting the cooking zone to level “0”.

Afterwards, the desired cooking level without automatic cooking system can be selected via the

PLUS sensor.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Rommelsbacher CT2203 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info