Bedienungsanleitung Rommelsbacher CT3403TC (Seite 18 von 24) (Deutsch, Englisch)

714006

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

MINUS-/PLUS sensors

The sensors MINUS and PLUS are for setting the desired cooking level as well as for

activating the automatic cooking system.

Switching a cooking zone on (cooking)

By quickly applying the MINUS or PLUS sensor after switch-on, the respective cooking zone will be

activated.

Setting a cooking level

When applying the PLUS sensor for the ﬁrst time, the appliance starts with setting 1. By further applying

the PLUS sensor, the level can be increased to 9.

When applying the MINUS sensor for the ﬁrst time, the appliance starts with setting 9. By further applying

the MINUS sensor, the level can be reduced to 1.

When continuously applying one of the two sensors, the indication changes in the rhythm of 0.5 seconds.

When continuously applying the PLUS sensor, the cooking level remains at the highest setting and when

continuously applying the MINUS sensor, it remains at cooking level “0” (end stop). Only by shortly

releasing the respective sensor and applying it anew, this end stop is passed. For example, this is necessary

for activating the automatic cooking system.

Automatic cooking system

Every cooking zone features an automatic cooking system: After activation of the cooking zone, it will be

heated for the period of a pre-programmed cooking time at max. power level (100 %). This allows for an

especially quick heating of your food and thus, helps to save time and energy. The period of the automatic

cooking system depends on the chosen cooking level (see chart under point “Cooking level parameters”).

Activating the automatic cooking system

The automatic cooking system of a cooking zone is activated by selecting the cooking level

via the MINUS sensor downwards and by switching via “0” to “9” or further down (e. g. to

level “5”). Now, a point glows in the cooking level display additionally on the right beside

the ﬁgure. This point indicates that the automatic cooking system is active for this cooking

level. The point goes out as soon as the time of the automatic cooking system has elapsed.

Then, the cooking zone keeps heating at the set level (e. g. “5”).

Quitting the automatic cooking system

The automatic cooking system can be quit any time by setting the cooking zone to level “0”. Afterwards,

the desired cooking level without automatic cooking system can be selected via the PLUS sensor.

Automatic temperature control

The cooking zones feature an automatic temperature control, i. e. the set temperatures are kept constantly

through a correspondingly cycled energy supply. This can be observed by the heating zones turning on and

off. You will ﬁnd the corresponding values for each cooking level in the chart under point “Cooking level

parameters”.

Please use the following settings

1 ... 3 for heating-up

4 ... 6 for steaming, stewing, boiling

7 ... 9 for parboiling, baking, roasting

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Rommelsbacher CT3403TC Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info