Bedienungsanleitung Rommelsbacher ELTAC EKA 179 (Seite 8 von 16) (Deutsch, Englisch, Französisch)

490068

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

Always ﬁ ll with water before switching on the appliance.•

Do not overﬁ ll container, leave at least 4 cm space below the container rim. If overﬁ lled, hot •

liquid may spurt out.

Risk of scalding from escaping steam.•

Caution: • The appliance will become hot when in use, so please only grab it on its insulated

handles. Only carry it when it is cool.

Temperature control/Setting the thermostat

The appliance is equipped with a precision thermostat (capillary tube thermostat). The thermos-

tat is inﬁ nitely variable from approx. 30° C up to the boiling point. An additional thermometer is

not required.

For juice making the appliance is equipped with a special operation mode, which ensures conti-

nuous heating.

When the cooking process has been completed or needs to be interrupted, reset the tempera-

ture selector to off-position and disconnect the plug.

Notes for cooking

The boiling point of the water varies in accordance with the atmospheric pressure and the alti-

tude of the location.

If the thermostat is set too high, this results in continuous heating and consequently strong

development of steam, loss of water in the appliance and furthermore a waste of energy.

To ﬁ nd the correct setting for boiling on your appliance, simply take the following steps:

1. Turn the temperature selector clockwise to the right to cooking setting („Kochen“).

2. Wait for the water to boil.

3. Slowly turn the temperature selector slightly to the left until the pilot lamp extinguishes.

After a short time the regulator will trigger the heating again.

Juice making

The Auto-Preserving Cooker is excellently qualiﬁ ed for juice making, too, when using the Juice-

Extraction Top, which you may buy in the specialised trade under model numbers EA 1803.

Operational procedure in short

1) Preserving

a) Place grating insert

b) Put in prepared glass jars or bottles

c) Fill with water

d) Place lid

e) Connect plug to electrical outlet

f) Select temperature

g) Pilot lamp is on (heating process)

h) Pilot lamp goes out for the ﬁ rst time indicating that the selected temperature has been

reached; now the actual cooking time begins. The temperature is maintained automatically.

i) Once the cooking procedure is ﬁ nished, reset the temperature selector to off-position and

pull the mains plug.

2) Juice making (Juice Extraction Top is available in the specialised trade)

a) Fill with at least 6 litres of water

b) Place adapter ring and Juice Extraction Top on the appliance according to the instructions

c) Place fruit prepared for juice extraction in the fruit basket

d) Place lid

e) Connect plug to the electrical outlet

f) Set temperature selector to ‘Entsaften’ (juice-making mode)

g) Pilot lamp is on (heating process)

h) Attention: Add water prior to every further juice-making procedure.

Once operation is ended reset the temperature selector to off-position and pull the mains plug.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Rommelsbacher ELTAC EKA 179 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info