Bedienungsanleitung Rommelsbacher MD1000 (Seite 51 von 60) (Deutsch, Englisch)

714262

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

The prepared dishes are

overcooked

• Cooking time too long. Reduce the cooking time (see cooking table).

• Steam pressure too high, try the lower steam pressure level.

• Check whether the dishes are suitable for cooking with steam pressure.

The appliance does not

heat up

• Is the appliance correctly connected to the power supply?

• Eventually the heating plate is defective, please contact your service point.

Water or steam leaks

out of the appliance

during the cooking

process

Gasket ring

• Check whether the gasket ring is placed correctly in the lid, if necessary

re-position it.

• Check whether the gasket ring shows any damages, if necessary replace it.

• Check whether there are soilings on the gasket ring, if necessary, clean it.

• Check whether there are soilings on the bayonet lock of the lid resp. the

pressure pot, if necessary, clean it.

Steam outlet valve

• Check whether the black valve cap is positioned well on the valve, if neces-

sary, re-position it.

• Check whether the protective cap is positioned correctly on the valve, if

necessary, re-position it.

• Check whether there are any soilings in the valve, if necessary, clean with a

pointed item (e. g. tooth pick made of wood - no metal).

Pressure valve for lid locking

• Check whether the transparent valve cap shows any damages, if necessary,

replace it.

• Check whether there are soilings at the sealing cap or at the valve bottom,

if necessary, clean it.

Steam cannot be

released by the steam

outlet valve

• Press the button for the steam outlet valve for several times in order to

loosen possibly blockings.

• Release pressure manually.

Let the appliance cool down, thus the pressure is reduced automati-

cally, however this may take some time!

Put on a heat-resistant glove or something similar.

Carefully lift the cap of the steam outlet valve at an angle with a long

object in order to release still existing pressure.

Lid is difﬁcult to be

closed

• The gasket ring is not inserted properly, if necessary, readjust the gasket ring.

• Safety bolt of the lid lock is blocked, if necessary, loose the blocking by

moving it back and forth.

Lid is difﬁcult to be

opened or cannot be

opened

• There is still steam pressure in the appliance, if necessary, release steam by

pressing the button for the steam outlet valve.

Display “AUF“(open) /

“ZU“(closed)

• Lid is not positioned properly on the appliance, if necessary, close lid pro-

perly by turning it clockwise until the stop.

Display “EC“ • The chosen programme is not suitable for cooking with lid, remove the lid.

Display “Ed“ • The selected programme requires an attached lid. Put the lid on the appli-

ance.

Display “E1“ to “E18“ • Disconnect the appliance from the mains and let it cool down.

• Check if mains voltage is correct and start again. If the error still occurs,

please contact your service point.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Rommelsbacher MD1000 Seite 51

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info