Bedienungsanleitung Rommelsbacher VAC155 (Seite 39 von 40) (Deutsch, Englisch)

714329

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

• Bag loses its vacuum after sealing

• Wrinkles, crumbs, grease or humidity can cause leaky spots at the sealing seam. Reopen the bag, clean

the upper part of the bag inside as well as the sealing bar. Then seal again. In case of very moist food it

is recommended to place a second sealing seam above the ﬁrst one.

• Check the bag for damage or holes. Padding out sharp edges of the contents using kitchen paper is

recommended.

Appliance does not create a complete vacuum inside an “Executive” container or with an

universal lid

• Check if one end of the connection hose is positioned into the hose port of the appliance and the other

end into the knob of the container’s lid.

• Do not ﬁll the container completely but leave a space above of at least 3 cm.

• Remember that liquids must be allowed to cool (in the fridge to be sure) before being vacuum-sealed.

• Check if the upper rim of the container or jar as well as the seal of the universal lid is undamaged and

clean. Clean the rim and the lid with a tepid moist cloth and start the vacuum sealing process again.

• Ensure that the seals of the lids on the container or universal lids ﬁt correctly and are undamaged.

“Executive” containers or universal lids lose their vacuum

• Check whether the arrow on the knob of the lid of the container and universal lid were turned to

“CLOSED” after the vacuum sealing process.

• Check whether the rim of the container / jar and the seal of the universal lid are undamaged and clean.

Clean them with a moist cloth and start vacuum sealing anew.

• Check the right ﬁtting and intactness of all seals in the lids of containers and universal lids.

• Make sure that the ring below the knob of the lid of the container / the universal lid ﬁts exactly.

• Check to see if the arrow on the knob of the lid of the container is turned to “CLOSED” after the

vacuuming process.

• Look to see if the ring under the knob of the lid of the container or universal lid is positioned correctly

and ﬁts exactly.

“Family” containers lose their vacuum

• Check whether the rim of the container in the wear area is faulty.

• See if the seals in the lid of the container ﬁt correctly and are undamaged.

• Check if the seal below the “PUSH” knob of the lid of the container is correctly positioned and ﬁts

exactly.

• Lids, preserving jars and sealings must not show cracks.

• Check to see if the seal below the middle knob of the lid of the container is correctly positioned and ﬁts

exactly.

DISPOSAL

The package and the packaging material are only made of environmentally sound materials. They can be

disposed in the local containers.

According to the Waste Electrical and Electronic Equipment Directive, this product must not

be disposed of with your normal domestic waste at the end of its life-span. Therefore, please

deliver it at no charge to your appropriately licensed local collecting facilities (e.g. recycling

yard) concerned with the recycling of electrical and electronic equipment. Please approach

your local authorities for how to dispose of the product.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Rommelsbacher VAC155 Seite 39

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info