Bedienungsanleitung Rommelsbacher VAC300 (Seite 30 von 32) (Deutsch, Englisch)

714314

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

Bag loses its vacuum after sealing

 Wrinkles, crumbs, grease or humidity can cause leaky spots at the sealing seam. Reopen the bag, clean the upper

part of the bag inside as well as the sealing bar. Then seal again. In case of very moist food it is recommended to

place a second sealing seam above the first one.

 Check the bag for damage or holes. Padding out sharp edges of the contents using kitchen paper is recommended.

Appliance does not create a complete vacuum inside an “Executive” container or with an

universal lid

 Check if one end of the connection hose is positioned into the hose port of the appliance and the other end into the

knob of the container’s lid.

 Do not fill the container completely but leave a space above of at least 3 cm.

 Remember that liquids must be allowed to cool (in the fridge to be sure) before being vacuum-sealed.

 Check if the upper rim of the container or jar as well as the seal of the universal lid is undamaged and clean. Clean

the rim and the lid with a tepid moist cloth and start the vacuum sealing process again.

 Ensure that the seals of the lids on the container or universal lids fit correctly and are undamaged.

“Executive” containers or universal lids lose their vacuum

 Check whether the arrow on the knob of the lid of the container and universal lid were turned to “CLOSED” after

the vacuum sealing process.

 Check whether the rim of the container/jar and the seal of the universal lid are undamaged and clean. Clean them

with a moist cloth and start anew vacuum sealing.

 Check the right fitting and intactness of all seals in the lids of containers and universal lids.

 Make sure that the ring below the knob of the lid of the container/universal lid fits exactly.

 Check to see if the arrow on the knob of the lid of the container is turned to “CLOSED” after the vacuuming

process.

 Look to see if the ring under the knob of the lid of the container or universal lid is positioned correctly and fits

exactly.

“Family” containers lose their vacuum

 Check whether the rim of the container in the wear area is faulty.

 See if the seals in the lid of the container fit correctly and are undamaged.

 Check if the seal below the “PUSH” knob of the lid of the container is correctly positioned and fits exactly.

 Lids, preserving jars and sealings must not show cracks.

 Check to see if the seal below the middle knob of the lid of the container is correctly positioned and fits exactly.

Disposal

According to the Waste Electrical and Electronic Equipment Directive, this product must not be disposed of

with your normal domestic waste at the end of its life-span. Therefore, please deliver it at no charge to your

appropriately licensed local collecting facilities (e.g. recycling yard) concerned with the recycling of electrical

and electronic equipment. Please approach your local authorities for how to dispose of the product.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Rommelsbacher VAC300 Seite 30

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info