Bedienungsanleitung Rosieres RF462IN (Seite 12 von 18) (Englisch, Französisch)

579398

Zoom out

Zoom in

Vorherige Seite

1/18

Nächste Seite

CLEANING THE OVEN : PYROLYSIS

- according to the model -

Pyrolysis is a cleaning method that uses high temperatures to

destroy dirt.

The resulting smoke is cleaned by the passage of a catalyser.

The oven door is provided with a safety lock that prevents it being

opened during pyrolysis due to the necessity of high temperatures.

The pyrolysis cycle may result in a slight odour in the kitchen

which will be more or less noticeable depending on the latter’s

aeration.

IMPORTANT:

Before carrying out pyrolysis:

• Take all accessories out of the oven as they will be damaged

in the high pyrolysis temperatures;

• Clean away all excess food spills or large scraps of food

which would take too long to be destroyed. Effectively, large

amounts of grease may catch fire under the intense heat

emitted by pyrolysis.

• Close the oven door.

• If you have an hob top installed above the oven, never use

the gas burners or the electric plates during pyrolysis to

avoid excessive heating of the oven’s control panel.

• It is strongly advised not to use detergents or any other

recommended product for cleaning ovens.

after the cycle pyrolysis

Open the oven door.:

Pyrolysis leaves a white residue on the oven walls.

Wait for the oven to cool completely then clean the inside

of the oven with a damp sponge to wipe off the residue.

Remarks:

• you will save energy by cleaning directly after cooking thus

making use of the residual heat in the oven.

The pyrolysis oven is fitted with a cooling fan which protects the

control panel and electronics from heat damage.

It begins when the pyrolysis cycle reaches high temperatures and

continues to rotate after the oven has been switch off until the

centre oven temperature is high.

11 GB

SERVICE CENTRE

Before calling the Service Centre

If the oven is not working, we recommend that:

• you check that the oven is properly plugged into the power

supply.

If the cause of the fault cannot be detected:

disconnect the oven from the mains, do not touch the oven and

call the after sales service.

Before calling the Service Centre remember to make a note

of the serial number on the serial number specifications plate.

The oven is supplied with a guarantee certificate that ensures that

it will be repaired free of charge by the Service Centre whilst

under guarantee.

This appliance is marked according to the

European directive 2002/96/EC on Waste

Electrical and Electronic Equipment (WEEE).

By ensuring this product is disposed of correctly,

you will help prevent potential negative

consequences for the environment and human

health, which could otherwise be caused by

inappropriate waste handling of this product.

The symbol on the product indicates that this

product may not be treated as household waste.

Instead it shall be handed over to the applicable collection point

for the recycling of electrical and electronic equipment

Disposal must be carried out in accordance with local

environmental regulations for waste disposal.

For more detailed information about treatment, recovery and

recycling of this product, please contact your local city office,

your household waste disposal service or the shop where you

purchased the product.

. Rotate the function selector to the position P. On the display,

appears the indication " ECO " or " SUP "

. The preset time is 1.30 hrs, this can be varied from 1.30 hrs

(Eco mode) to 2 hrs (Sup mode) via the programmer (setting

button " + " or " - ").

If the oven is very dirty, it is recommend o increase the time to

2 hrs, if the oven is moderately dirty reduce the cleaning cycle

time to 1.30 hr.

. . It is possible to defer the start time of the pyroclean cycle by

changing the END time via the programmer.

. After few minutes, when the oven reaches a high temperature,

the door locks automatically.

. The pyroclean cycle can be stopped at any time by turning the

function selector back to '0' (the word OFF will be displayed for

3 seconds)

. Once the pyroclean cycle is finished, the pyrolysis will switch

off automatically. On the display appears the indication " END "

until the door is locked then " "

. You can turn the function selector back to " 0 " but if the temperaure

is still high, the " " indication appears to inform that the

door is locked.

Activation of the PYROLYSIS

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Rosieres RF462IN Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info