Bedienungsanleitung Rossler 021090 Neutron (Seite 42 von 68) (Englisch, Holländisch, Französisch)

533492

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

- 42 -

E.When time reaches 0, the test result (F1-F6) appears on the display.

F1=Excellent F2=Good F3=Fair F4=below average F5= No Good F6= Poor

F.If the computer does not detect your current heart rate ﬁ rst, pressing RECOVERY will not enter into

pulse recovery test. During the pulse recovery test, press RECOVERY to exit the test and return to the

stop status.

4.Pulse Measurement

Please place both your palms on the contact pads and the computer will show your current heart beat

rate in beats per minute (BPM) on the LCD after 3~4 seconds. During the measurement, heart icon will

ﬂ ash with simulative ECG showing.

Remark: During the process of pulse measurement, because of the contact jamming, the measurement

value may not be stable when start, then it will return to normal level. The measurement

value cannot be regarded as the basis of medical treatment.

NOTE: If the computer is also equipped with wireless heart rate measuring via the transmitter belt, and

with hand pulse function, the hand-measurement-signal-detecting is preferred.

Speciﬁ cations

Speed KM/H(M/H): showing your current speed. Range: 0.0-99.9 KM/H(M/H).

RPM: showing the current rotate per minute. Range : 0-999.

TIME: the accumulative exercise time, range : 0:00-99M59S.

the preset time range is 5:00-99M00S. The computer will start to count

down from preset time to 0:00 with average time for each resistance

level. When it reaches to zero, the program will stop and computer

alarm. If you do not preset the time, it will run with one minute

decrement each resistance level.

DIST: the exercise accumulative distance. Range : 0.0-99.9-999KM(MILE)

the preset distance range :1.0-99.0-999. When the distance reaches 0,

the program will stop and the computer will alarm.

CALORIE: the exercise accumulative calories burnt. Range : 0.0-99.9-999

the preset calories range :10.0-90.0-990. When the calorie reaches 0,

the program will stop and the computer will alarm.

PULSE: showing the exercise heart rate value.

Range: 30-240BPM(beat per minute)

RESISTANCE LEVEL: showing resistance level. Range:1-16

WATT: show the exercise watt

BREAKDOWN DISPLAY

1. When the computer displays ERROR1, please check if the motor is good and if the motor

wires connect well.

2. When the computer displays ERROR2, please check if your hands contact the sensors well

as there no body fat signal detected.

AUDIO AMPLIFIER AND SPEAKER (IF HAVE)

Connect the audio input plug to the audio player, then turn on the audio switch that in the

right side of the computer. In that case, the audio can be in play.

NOTE: During play mp3 , the audio frequency is very near by the heart rate frequency,

so sometimes the heart rate will ﬂ ash or get the wrong heart rate value it is

normal. so suggest not to use mp3 when measure the heart rate.

ADAPTOR

INPUT: AC (The voltage depends on different country)

OUTPUT: 8VDC 500mA AC-DC ADAPTOR

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Rossler 021090 Neutron Seite 42

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info