Bedienungsanleitung Rossler 021104 Crosstrainer Hyper (Seite 25 von 28) (Englisch, Holländisch)

532608

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

- 25 -

Computer Instruction

SPECIFICATIONS:

KEY FUNCTIONS:

MODE: Push down to select the display window which needs to .

SET: To set the values of time, distance and calories

RESET: The key to reset the value to zero by pressing the key.

Note: Press any button of MODE/SET/RESET

To enter the mode of pulse test

FUNCTIONS:

1. SPEED: A displays speed

Display of instantaneous speed.

2. TIME: B displays the exercise time.

1) Count the total time from exercise start to the end, count will stop automatically if no exercise for 3 seconds.

2) Exercise time can be set in advance, when it approaches the preset time ,the computer will alarm 10 seconds.

3. DISTANCE: C displays distance.

1) Count the total distance from exercise start to the end.

2) Exercise distance can be set in advance, when it approaches the preset distance, the computer will alarm 10 seconds.

4. CALORIES: D displays consumed calories.

1) Count the total calories consumed from exercise start to the end.

2) The calories value can be set in advance, when it approaches the preset calorie, the computer will alarm 10 seconds.

5. PULSE: E displays the pulse.

Hold the sensors by your hands to test your pulse per minute.

6. WHEEL PERIMETER:

The wheel perimeter is preset to be Φ60(or can be changed according to di erent factories).

7. ALARM: The computer will “Beep” when press “MODE” “SET” or “RESET” buttons.

8. AUTO ON/OFF&AUTO START/STOP: Without any signal exercise or operation for 8 minutes, the power will turn o

automatically and all the memory will be clear o .

OPERATION

1. Press “MODE” to choose the display window needs to be preset, a will  ash on the left upper corner of the setting window,

the press “SET” to set the alarm timealarm distance or alarm calories. Press “RESET” to clear the value.

2. PULSE RATE: Before measuring your pulse rate, press any button, “P” will change into “0” on E display window, then enter

pulse test mode, please place your palms of your hands on Both of your contact Pads and the monitor will show your current

heart beat rate in beats per minute (BPM) on the LCD after 3~4 seconds.

Remark: During the process at pulse measurement, because of the contact jamming, the measurement value may

be higher than the virtual pulse rate during the  rst 2 A3 seconds then will return to normal level. The measurement

value can not be regarded as the basis of medical treatment.

Functions: Running Time 00:00-99:59 M:S

Current Speed The maximum signal can be pickup is 99.

is99.9KM/H/ or mile/H

Trip Distance 0-9999

Pulse Rate 40-240 BPM

CALORIES (CAL) 0.0-999.9 KCAL

Battery type 2 pcs of size 1.5VAA

Operating temperature 0˚C ~ +40˚C (32˚F ~ 104˚F)

Storage temperature -10˚C ~ +60˚C (14˚F ~ 140˚F)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Rossler 021104 Crosstrainer Hyper Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info