Bedienungsanleitung Rotel RC1550 (Seite 7 von 64) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch)

490000

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

English

The RC-1550 printed circuit boards (PCB) are designed with

Symmetrical Circuit Traces. This insures that the precise timing of the

music is maintained and faithfully recreated. The RC-1550 circuitry

uses metal ﬁlm resistors and polystyrene or polypropylene capacitors

in important signal paths. All aspects of this design have been

examined with the ﬁnal goal being faithful reproduction of music.

The RC-1550 is straightforward in its installation and operation. If you

have experience with other stereo systems, you shouldn’t ﬁnd anything

perplexing. Simply plug in the associated components and enjoy.

A Few Precautions

Please read this manual carefully. It provides complete information on

how to incorporate the RC-1550 into your system as well as general

information that will help you get optimum sound performance. Please

contact your authorized Rotel dealer for answers to any questions you

might have. In addition, all of us at Rotel welcome your questions and

comments.

Save the RC-1550 shipping carton and all enclosed packing material

for future use. Shipping or moving the RC-1550 in anything other than

the original packing material may result in severe damage to your

ampliﬁer.

Fill out and send in the owner’s registration card packed with the

RC-1550. Also be sure to keep the original sales receipt. It is your

best record of the date of purchase, which you will need in the event

warranty service is ever required.

Placement

Like all audio components that handle low-level signals, the RC-1550

can be affected by its environment. Do not stack the RC-1550 on top

of a power ampliﬁer. This will minimize chance it will pick up hum

or interference. We recommend installing the RC-1550 in furniture

designed to house audio components. Such furniture is designed to

reduce or suppress vibration which can adversely affect sound quality.

Ask your authorized Rotel dealer for advice about component furniture

and proper installation of audio components.

Cables

Be sure to keep the power cords, digital signal cables and regular

audio signal cables in your installation away from each other. This

will minimize the chance of the regular audio signal cables picking

up noise or interference from the power cords or digital cables. Using

only high quality, shielded cables will also help to prevent noise or

interference from degrading the sound quality of your system. If you

have any questions see your authorized Rotel dealer for advice about

the best cable to use with your system.

Remote Control

The RC-1550 includes an RR-AT94 remote control that operates many

of the controls of the RC-1550. In addition, the remote operates

basic features of some Rotel CD players, DVD players, and AM/FM

tuners. See the “Audio Controls” and “Controlling Other Components”

sections of this manual for detailed information.

Remote Sensor

The remote sensor receives infrared signals from the remote control.

Do not cover or block the sensor. It must be unobstructed or the remote

control will not work properly.

The operation of the remote sensor can also be affected if it is exposed

to bright sunlight or certain types of lighting (such as halogen lights)

that emit infrared light. In addition remote control functions may not

work reliably if the batteries in the RR-AT94 are weak.

Note: To use the remote, aim it at the remote sensor on the front panel

of the RC-1550.

Remote Control Batteries

Two UM-4/AAA size batteries (supplied) must be installed before

the remote control can be used. To install the batteries, remove the

cover on the back of the RR-AT94. Install the batteries as shown in the

illustration in the battery well. Test the control for proper operation,

then replace the cover. When the batteries become weak the remote

control won’t operate the RA-1520 consistently. Installing fresh

batteries should eliminate the problem.

AC Power and Control

AC Power Input

Note: Be sure to set the Volume control to the minimum (full

counterclockwise) position before connecting the power cord.

Connect the supplied power cord to the AC Input receptacle on the

rear panel. Do not connect the power cord to the power outlet until all

the audio input and output connections have been made.

It is usually best to plug the RC-1550 directly into a 2-pin polarized

wall outlet. Avoid the use of extension cords. A heavy duty multi-tap

power outlet strip may be used if it (and the wall outlet) is rated to

handle the current demanded by the components connected to it.

Your RC-1550 is conﬁgured at the factory for the proper AC line

voltage in the country where you purchased it (either 120 volts AC or

230 volts AC with a line frequency of either 50 Hz or 60 Hz). The AC

line conﬁguration is noted on a decal on the rear panel.

Note: Should you move your RC-1550 amplifier to another country,

it is possible to reconfigure your amplifier for use on a different line

voltage. Do not attempt to perform this conversion yourself. Opening

the enclosure of the RC-1550 exposes you to dangerous voltages.

Consult a qualified service person or the Rotel factory service

department for information.

If you are going to be away from home for an extended period of time

such as a month-long vacation, it is a sensible precaution to unplug

your ampliﬁer (as well as other audio and video components) while

you are away.

Rotel RC1550 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info