Bedienungsanleitung Rotel RC1550 (Seite 10 von 64) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch)

490000

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

RC-1550 Stereo Control Ampliﬁer

Recording Selector Control

Front panel only

Turn the front panel control

to select the input signal that goes to

the record outputs. When you are not recording, set the control to Off.

This minimizes the chance of interference from other components in the

system.

Having a separate Recording and Listening selector adds a signiﬁcant

degree of ﬂexibility in how you can use the RC-1550. For example

by selecting CD with the Record Selector and selecting Tuner with the

Listening Selector you can record a CD onto a tape while listening to

the tuner.

If you have a three-head recorder or a DAT recorder that allows

simultaneous read and write operation, you can monitor the recording

by setting the LISTENING control

to the Tape 1 or Tape 2 position.

Note: If you select TAPE 1 with the RECORDING control

, the

recording signal will only be available at the TAPE 2 recording

outputs. To copy a tape from one tape recorder to another, connect

the source recorder to the TAPE 1 inputs and outputs and set the

RECORDING control to Tape 1. Connect tape recorder you are

copying to to the Tape 2 inputs and outputs.

Controlling Other Components

In addition to operating many of the controls of the RC-1550, the

RR-AT94 remote control can operate basic features of some Rotel CD

players, DVD players, and AM/FM tuners.

CD Functions

The

PLAY,

STOP,

PAUSE,

{

}

TRACK and, RANDOM

buttons, and NUMERIC buttons (0 - +10) operate many Rotel CD

players after the CD button on the remote has been pressed.

DVD Functions

The

PLAY,

STOP,

PAUSE,

{

}

TRACK and RANDOM buttons

operate Rotel DVD players, after the AUX1 button on the remote has

been pressed.

Tuner Functions

The BAND, TUNING

, and additional tuning feature buttons (PTY,

TA, TP, etc.) operate Rotel tuners, after the TUNER listening button on

the remote has been pressed.

Note: By default, the RR-AT94 operates the Rotel RT-1080/RT-1082/

RT-1084 tuners. The remote can be reprogrammed to operate the

RT-940AX tuner. This programming only needs to be done once:

To program for the RT-940AX: press the POWER button and the

2 button simultaneously.

To program for the RT-1080/RT-1082/RT-1084: press the

POWER button and the 1 button simultaneously.

Troubleshooting

Most difﬁculties in audio systems are the result of incorrect connections,

or improper control settings. If you encounter problems, isolate the area

of the difﬁculty, check the control settings, determine the cause of the

fault and make the necessary changes. If you are unable to get sound

from the RC-1550, refer to the suggestions for the following conditions:

Standby Power Indicator Is Not Lit

The Standby Power Indicator should be lit whenever the RC-1550 is

plugged into the wall power outlet. If it does not light, test the power

outlet with another electrical device, such as a lamp. Be sure the

power outlet being used is not controlled by a switch that has been

turned off.

Fuse Replacement

If another electrical device works when plugged into the power outlet,

and the Standby Indicator still will not light when the RC-1550 is

plugged into the wall outlet, it indicates that the internal power fuse

may have blown. If you believe this has happened, contact your

authorized Rotel dealer to get the fuse replaced.

No Sound

Check the signal source to see if it is functioning properly. Make sure

the cables from the signal source to the RC-1550 inputs are connected

properly. Be sure the Listening Selector is set to the proper input. Check

the power ampliﬁer for power and proper operation. Check all the

wiring between the RC-1550 and the power ampliﬁer, and the power

ampliﬁer and speakers.

Remote Control Code Conﬂicts

Rotel uses the same IR remote control codes for all its audio products.

In systems that have multiple Rotel products, the IR control codes of a

remote control that is supplied with one product may interfer with the

control codes of another product. The RR-AT94 and the RC-1550 can

be set to alternate control codes to prevent such conﬂicts.

To change the IR codes of the RR-AT94, press the Phono button and

the 2 button at the same time. To change the IR codes of the RC-1550,

point the RR-AT94 at the RC-1550 then press and hold the 2 button for

5 seconds. The LED in the volume control will ﬂash to indicate the IR

code has changed.

Note: After changing the remote codes for the remote control and

the preamplifier as described above, the remote control will no

longer operate the Rotel tuners. To return the RR-AT94 IR code to the

default setting, press the Phono button and the 1 button at the same

time. To return the IR code of the RC-1550 to the default setting,

point the RR-AT94 at the RC-1550 and press and hold the 1 button

for 5 seconds. The LED in the volume control will flash to indicate the

IR code has changed.

Resetting the IR codes

Should you need to reset the IR code, press the MUTE button

on the

RR-AT94 remote control for more than 5 seconds while pointing it at

the RC-1550. The unit will return to default condition and the Listening

CD LED

will turn on to indicate the IR code is reset. Contact your

authorized Rotel dealer for further information.

Rotel RC1550 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info