Bedienungsanleitung Rotel RDA986 (Seite 5 von 8) (Englisch)

489969

Zoom out

Zoom in

Vorherige Seite

1/8

Nächste Seite

RDA-986

A Few Precautions

Please read this manual carefully. In addition to installation and

operating instructions, it provides valuable information on various

RDA-986 system configurations as well as general information

that will help you get optimum performance from your system.

Please contact your authorized Rotel retailer for answers to any

questions you might have. In addition, all of us at Rotel welcome

your questions and comments.

Save the RDA-986 shipping carton and all enclosed packing mate-

rial for future use. Shipping or moving the RDA-986 in anything

other than the original packing material may result in severe dam-

age that is not covered by the warranty. Be sure to keep the origi-

nal sales receipt. It is your best record of the date of purchase,

which you will need in the event warranty service is required.

Placement

Use common sense when placing the RDA-986 in a cabinet or

when stacking other equipment. Make sure that the shelf or cabi-

net can support its weight. Do not stack heavy components on top

of the RDA-986. Avoid placing the unit where it may be subject to

excessive heat such as on top of a large power amplifier or near a

heat register. For best performance, avoid placing the unit where

it may be subject to vibration, such as near a speaker.

AC Power and Control

AC Power Input

Your RDA-986 is configured for the proper AC voltage in the coun-

try where you purchased it (either 115 volts or 230/240 volts). The

AC line configuration is noted on a decal on the back panel.

Note: Should you move your unit to another country, it may be

possible to reconfigure it for use on a different line voltage. Do not

attempt to perform this conversion yourself. Opening the enclo-

sure of the RDA-986 exposes you to dangerous voltages. Consult a

qualified service person or the Rotel factory service department

for information.

The RDA-986 should be plugged directly into a 2-pin polarized wall

outlet or into the switched outlet on another component in your

audio system. Do not use an extension cord.

Be sure the power switch on the front panel of the RDA-986 is

turned off. Then, connect the supplied power cord to the AC

power receptacle on the rear of the unit and the AC power outlet.

If you are going to be away from home for an extended period of

time such as a month-long vacation, it is a sensible precaution to

unplug your RDA-986 (as well as other audio and video compo-

nents) while you are away.

Contents

Getting Started ______________________________________ 3

A Few Precautions 3

Placement 3

AC Power and Control ________________________________ 3

AC Power Input

Power Switch

and Power Indicator

Digital Signal Connections ____________________________ 4

Digital Inputs

and

Digital Input Selector Switch

Coaxial Digital Output

DTS Indicator

and Signal Indicator

Analog Signal Connections ___________________________ 4

25-pin Analog Output

RCA Analog Outputs

25-pin Analog Input

Specifications ________________________________________ 5

Getting Started

Thank you for purchasing the Rotel RDA-986 DTS

Surround

Adaptor. The RDA-986 is a high-quality outboard digital processor

for decoding discrete DTS 5.1 channel surround sound encoded

Laser Discs and Digital Video Discs. The RDA-986 accepts an en-

coded DTS digital signal, decodes it, and sends six discrete ana-

log surround sound audio signals to the 5.1 channel input on a

surround sound processor or other system controller. With its pre-

mium components, Balanced Design, and robust construction, the

RDA-986 will provide years of enjoyment in your system.

The RDA-986 is simple to operate. Other than a power switch,

there are no front panel controls or switches. The unit senses

when a DTS signal is present and engages the decoding circuitry

automatically.

The RDA-986 also provides pass-through digital outputs and ana-

log inputs to provide full flexibility in a number of system configu-

rations. For example, a second outboard decoder (such as Dolby

Digital) can be connected to the analog inputs of the RDA-986.

When a DTS signal is present at the digital input, the RDA-986 will

decode it and send the signal to the outputs. When no DTS signal

is present, the RDA-986 will pass the signal from the analog inputs

to the outputs.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Rotel RDA986 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info