Bedienungsanleitung Rotel rdv 1050 (Seite 12 von 38) (Englisch)

139016

Zoom out

Zoom in

Vorherige Seite

1/38

Nächste Seite

RDV-1050 DVD Player

Getting Started

Turning On the RDV-1050

With the TV/DVD switch

set to DVD, press

the DVD POWER button

on the RR-DV96.

Or press the STANDBY

button on the front

panel. The display window will light indicat-

ing the RDV-1050 is “on”. The STANDBY in-

dicator is always lit when the power cord is

connected to the wall outlet.

The opening display appears on the TV screen.

The following messages may appear at the

bottom of the opening display.

• NOW READING (The RDV-1050 is read-

ing the disc information.)

• REGION CODE ERROR! (The region code

of the DVD VIDEO disc does not match the

RDV-1050. The disc cannot be played.)

• OPEN

• CLOSE

• NO DISC

NOTE: Even if you turn off the RDV-1050

it is not disconnected from the AC power

source as long as it is connected to the wall

outlet. This state is called standby mode. In

this state, the unit consumes a very small

amount of power.

NOTE – Invalid Operation Icon:

With some discs the RDV-1050 may not be

able to perform certain operations. For ex-

ample, some discs may not allow rapid ad-

vance/reverse or slow motion playback.

When you press a remote control or front

panel button if the RDV-1050 cannot per-

form the operation the

Invalid Opera-

tion icon appears on your TV screen.

Operations are occasionally unacceptable

even if it is not displayed.

Initial Setup

When you turn on the RDV-1050 for the first

time, the following message appears on the

TV screen.

EXECUTE DVD PLAYER SETUP?

BASIC PICTURE/AUDIO SETTING

YES - PRESS ENTER NO - CANCEL

You can set the display language, TV moni-

tor type and digital output before using the

RDV-1050, by using the following procedures.

1 Press ENTER

. The first page of the DVD

PLAYER SET UP display appears. The pull-

down menu of the ON SCREEN LAN-

GUAGE is already open.

ON SCREEN LANGUAGE options

2 Press /

32 14

to select the desired

language. You can select the on-screen lan-

guage for the preference displays, etc. from

among ENGLISH, FRENCH and GERMAN.

3 Press ENTER. The second page is shown.

The pull-down menu for the MONITOR TYPE

is already open.

4 Press / to select the desired monitor

type. For a normal (conventional) TV, se-

lect 4:3 LB or 4:3 PS. For a wide-screen TV,

select 16:9 NORMAL or 16:9 AUTO.

5 Press ENTER. The third page is shown, in

which the pull-down menu of the ANALOG

OUT is already open.

6 Press /to select a desired analog output

signal type. Set this item correctly when you

play back a DVD VIDEO disc recorded with

surround multichannel audio.

• When connecting to a surround decoder,

select 2-CH DOLBY SURROUND.

• When connecting to a stereo amplifier/re-

ceiver or TV, select 2-CH STEREO.

• When connecting the unit’s 5.1-channel

output, select MULTI CHANNEL. Note that

you can perform fine tuning for your speak-

ers when MULTI CHANNEL is selected.

7 Press ENTER. The third page is shown. The

pull-down menu of the DIGITAL AUDIO

OUTPUT is already open.

8 Press / to select a desired digital out-

put signal type. If you connect the RDV-1050

to an external surround decoder or D/A

converter set this as needed.

• When connecting to a Dolby Digital decoder,

select DOLBY DIGITAL/PCM.

• When connecting to a DTS decoder, select

STREAM/PCM.

• When connecting to other digital devices,

select PCM ONLY.

9 Press ENTER. The TV screen returns to the

opening display.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Rotel rdv 1050 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info